ZJ-TB2018 Servo Edge Detection All-in-one Machine ALL-IN-ONE SERVO EDGE DETECTING EQUIPMENT
Product Description
The ZJ-TB2018 infrared servo edge detector is used in textile, light industry and chemical industry. It is usually installed in the setting machine, stenter, coating machine, flocking machine, etc. When the fabric enters the equipment, Both sides of the fabric must be incorporated into the needle plate or cloth clip. When the edge position of the fabric is constantly changing, the infrared edge detection device can adjust the position of the needle plate chain rail, so that the cloth edge is correctly incorporated into the needle plate, so that the edge of the processed fabric is The needle width is maintained well.
ZJ-TB2018 is an “integrated edge detection device” with vertical control loops on the left and right sides. It sets a new standard for high-speed production of needles, with a simplified structure, real-time detection with a CCD infrared sensor with a resolution of 0.1mm, and needles on the ground at the edge of the cloth. By driving the track of the setting machine by the motor on the row of teeth, this edge detector is easy to use even in harsh environments.
Whether you are installing or refitting new or old equipment, you can make your equipment run smoothly at high speed and have good productivity.
Product description
ZJ-TB2018 model servo edge detecting all-in-one equipment is widely applied in the textile,light and chemical industries which is usually installed in the feeding area of the setting machine,spreading machine,coating machine and flocking machine.When the fabric is entering the equipment,the two sides of the fabric must be set into the faller bar or clip accurately .When the edge position of the fabric in the feeding area is changing, the edge detecting equipment can adjust the position of the faller bar chain .This can promise the fabric edge setting into the faller bar correctly to keep the needle width always same of the fabric edge while processing.
ZJ-TB2018 model is the original one called all-in-one edge detecting equipment in China which have two independent control circuits on the left and right sides.It has established a new standard for needling fabric edge accurately in the high-speed production. The equipment with simplified structure ,going with real-time detecting CCD infrared electric eye with 0.1mm resolution ratio ,ensures the fabric edge needle accurately.Through the action of motor driving track of the setting machine on the toothrow, this equipment also durable in use even under severe environments.
Your new or old machine installed or modified will have a stable and high-speed working performance leading to an improved productivity.
Reviews (0)
You must be logged in to post a review.
Related products
RIBBONS BRUSH TRIMMED
Description
The aim of these ribbons is the interchange ability simplicity, at the present in use both for the teasiling machine and for the wool carding machines and for the other workings where there is the need of an immediately replacementManufacturing Features
- Manufatured with a special base, with more levels, that allows to avoid deformations during the working phases
- The trimming can be with the application of horse hair, bristle, nylon, tampico
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Application simplicity on any surface, circular of flat
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations
- Long working life even in hard exercise conditions
Rotary Encoder
Complete models:
The product series includes solid shaft, hollow shaft, half-hollow shaft and cone shaft models, servo-specific encoders, and wire encoders.
Such as:
Size: Φ25mm/Φ30mm/Φ38mm/Φ48mm/Φ58mm/Φ60mm/Φ80mm/Φ100mm
Resolution:
100PPR/200PPR/300PPR/360PPR/400PPR/500PPR/600PPR/1000PPR/1024PPR/2000PPR/2048PPR/2500PPR
/5000PPR
Rotary encoder is a displacement sensor that integrates mechanical, optical and electrical technologies. Through photoelectric conversion, mechanical displacement such as angular displacement and angular velocity can be converted into corresponding electrical pulses. It is mainly used for speed measurement, positioning, counting and other applications.
All series are metal housings, high protection level
Optimized circuit design, good EMC and high accuracy
Multiple output type options
Installation size compatible with mainstream brands, easy to replace
Components are well-known brands, guaranteed
Small size, light weight and easy installation
Suitable for a variety of automation equipment
Can be customized
HCS Series Card type PLC
HCS series is a new series of economical card type PLC, ptimized structure, innovative communication, PID and other powerful instructions for easy programming, built-in cloud engine. MPU built-in Ethernet+ RS485, some MPU integrated analog interface.
Hardware features:
1. Easy selection: Product model naming is easy to understand and convenient for model selection.
2. Structure optimization: Optimized structure design, compact size, beautiful appearance, saving installation space.
3. Easy wiring: Direct insert terminal, humanized design, more convenient wiring.
4. Integrated analog interface: The PLC main unit integrates DI/DO and AI/AO with flexible configuration and higher cost performance.
5. Ethernet + : Ethernet and RS485 interfaces are standard on the PLC main unit, supporting simultaneous operation of two communication ports. Each communication port can be programmed and networked as a master or slave station.
6. Unlimited networking: PLC main unit can be networking, theoretically can form unlimited points control network, a perfect substitute for medium or even large PLC system.
7. Perfect temperature control: Thermal resistance, thermocouple and unique temperature& humidity sensor modules, etc., perfectly meet the application requirements of process control.
8. Communication + : Communication extension module with isolation to meet stable communication extension requirements.
Programming software features:
1. Three programming languages: HPMaster is a PLC programming software conforming to IEC 61131-3, which supports LD (ladder diagram), FBD (function block diagram) and IL (instruction table).
2. Good compatibility: Stable operation in Win98, Win200X, WinXP, Win7, Win8, Win10 and other operating systems.
3. Prompt message and help function: All instructions and detailed information of hardware modules can be opened in the software through F1 key to find the answer. Even if HPMaster programming software is used for the first time, the program can be easily written.
4. Three-level password protection: Password for project files, password for PLC, password for individual program blocks, and protection functions such as preventing program upload.
5. Modular program project structure: Up to 63 program blocks can be established (including main program, subroutine, interrupt program), programming language can be chosen arbitrarily, execution order of program blocks can be adjusted arbitrarily, each block can be imported and exported separately and has the same password protection as program project.
6. Cloud programming: The built-in cloud engine enables PLC remote programming, download, firmware upgrade, diagnosis, monitoring and debugging through HNC cloud, enabling easy remote connection and detecting on-site conditions at any time.
Locally, the PLC can be programmed with a cloud engine built into the TP300 series HMI.
7. Program simulator: Can be simulated running PLC program in the case of complete separation from PLC,greatly reducing field debugging time and improving debugging efficiency.
8. Communication simulator: Equipped with a communication simulation tool specially designed for debugging communication instructions, it can simulate the process of PLC executing communication instructions and processing the data returned from the slave computer.
9. Online monitoring and debugging function: Provide up to 10 pages of component monitoring table, can choose to display data in different data formats, support mixed monitoring of bit components and register components and display component notes at the same time.
10 Unique real-time curve function: Real-time curve monitoring can be carried out on any register components to facilitate process control and debugging.
11. PLC execution file: The PLC source program can be generated into a PLC execution file that can be independently released and executed, convenient and safe to give the PLC execution file to the end user to download, there is no need to worry about the user knowing the source program content.
12. Firmware upgrade function: No matter CPU host or extension module, firmware can be upgraded for free. Even the previously purchased products can have various latest functions continuously introduced.
13. Powerful online PLC function: It can search out all PLC connected with the PC, show the information and status of all online PLC, and can choose any PLC for online monitoring, program download, firmware upgrade, control PLC running stop, etc.
Programming instructions features:
1. Powerful innovation convenience instructions: on the basis of analyzing and absorbing various EXISTING PLC instructions, many powerful innovation convenience instructions are launched. Such as communication instruction (MODR, MODW HWRD HWWR), PID control (PID), valve control (VC), upper and lower alarm (HAL, LAL), send (SC), the temperature curve radius (TTC), only one instruction can implement other brand PLC need multiple instructions to realize the function, greatly improve the efficiency of programming and program run faster.
2. Instruction routines: In the help document, all instructions are explained in detail and corresponding routines are supported to be opened and downloaded into PLC.
3. Rich communication protocols: built-in Modbus TCP, Modbus RTU/ASCII protocol, free communication protocol and HNCbus high-speed communication protocol instructions independently developed by HNC.
4. Powerful communication instruction: No matter use what kind of communication protocol is simply a communication instruction can complete complex communication function, no conflict, to send and receive control for communication port, communication interrupt handling problems such as trouble, and the same communication port can use different protocols, complete the required all sorts of data exchange easily.
5. Powerful analog input processing: AI register can be used to directly access analog input, analog input support engineering conversion, sampling times setting and zero correction.
6. Powerful analog output processing: The analog output can be directly controlled by AQ register. The analog output can support engineering conversion and can be configured with blackout output holding function.
7. PID control function: Support 32 incremental PID, 32 self-tuning PID, 32 fuzzy temperature control, with TTC temperature curve control, VC valve control and other instructions to easily achieve a variety of complex control requirements of industrial site.
HSV-180AD AC380V Servo Drive
HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
...................................................................FEATURES..........................................................................
- High Performance AC digital servo drive
- Easy and flexible control (five control modes)
- Full state display
- Various interface and control modes
- Applicable to situations that requires high speed and high power
- Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
HHS Series High Performance Soft Starter
HHS series of soft starter is the latest development of HNC has an international leading technology of intelligent AC motor soft starter. HHS Series Soft Starter uses the power electronic technology, the microprocessor technology and the modern control theory technology, has the present international advanced level the new starting equipment. This product can effectively limit the starting current of asynchronous motor, which can be widely used in fan, water pump, compressor and other transportation and heavy equipment, is the star delta conversion, autotransformer, magnetron step-down start ideal replacement equipment.
HHS series of soft starter has excellent performance with the international high-end soft starter of the same, further strengthen the product reliability and environmental adaptability, humanization and professional design, can meet various application requirements.
......................................................................FEATURES........................................................................
1. Multi start mode: The maximum output torque can be obtained by the voltage ramp mode. The maximum current can be obtained by the constant current soft starter mode, which can be applied to the load with large static friction force 2. High reliability: The high performance microprocessor is used to process the signal in the control system, so as to avoid the excessive adjustment of the analog circuit in the past, so as to obtain excellent accuracy and execution speed 3. High performance: Programmable delay start mode, programmable interlocks control No sequence requirements for input power Starting time, parking time can be modified Dynamic fault memory function, easy to find the cause of the fault, up to ten faults can be recorded 4. Field bus full dynamic control monitoring starter, easy networking: Bus type is MODBUS. 5. Variety of protection functions: Protection against over voltage, under voltage, over temperature, phase loss, motor overload, etc.。 6. English character display function: LCD display a variety of operating parameters, programming and fault state with text prompts 7. Perfect humanized design: Beautiful appearance and reasonable structure Perfect function and simple operation Solid, reliable and compact The artistic design of industrial products 8. Reliable quality assurance: Computer simulation design STM patch production process Excellent electromagnetic compatibility High temperature aging, vibration test before the factory 9. Quick and thoughtful after-sales service: Reliable performance and quality lay the foundation for quality service Provide excellent and complete equipment design Timely and thoughtful use of consulting Continuously improve product performance according to user opinion.
INFRARED CENTERING EQUIPMENT
Product Description
Infrared centering machine device is a new product integrating light, machine and electricity. This device is widely used in printing and dyeing industry, setting machines, singeing machines, washing machines, drying machines, printing machines and other mechanical equipment. It has a strong center correction function, which can quickly and steadily correct the deviation of the symmetrical position of the fabric axis without being affected by the material and thickness of the fabric. It has the function of expanding the wrinkles of the fabric to ensure that the fabric is flat and centered. Processing Equipment.
Product description
The infrared centering equipment is a new product integrated with optical,mechanical and electronic technologies which is widely applied to setting machine,singeing machine,washing machine,drying machine and printing machine of the printing and dyeing industry.The equipment has a strong ability of central correction which can correct the deviation of axisymmetric position of the fabric fast and smooth without the influence of the fabric material and thickness.The equipment also has the ability of tightening the creases of the fabrics which can promise the fabrics entering the processing equipment smooth and medially .
Performance characteristics
1. Three spreading rollers can fully unfold the fabric; the contact surface between the fabric and the spreading roller can be easily adjusted.
2. Infrared detector, full-frame non-contact detection of fabric deviation;
3. The cylinder drives the correction roller to keep the fabric stably in the middle position;
4. Convenient operation, sensitive action and reliable operation.
Performance features
1. The three pieces of spreading rollers can unfold the fabric fully; the contract surface between fabric and spreading rollers can be adjusted easily.
2. The infrared detector can detect the deviation of full width fabric contactlessly.
3. The cylinder-driven roller can locate the fabric in the middle position steadily.
4. Easy operation, sensitive action, reliable performance.
Product parameter
1. Stainless steel expanding roller: φ100mm*3, winding wire φ4mm, round wire or flat wire
2. Motor power: 750W*2 sets (depending on the door width)
3. Infrared control system: one set (many types to choose from)
4. Alignment correction drive: cylinder drive, air pressure 3kgf/c㎡
5. Power supply: three-phase 380V AC 50Hz
6. Installed capacity: dynamic 1.5KVA
Technical parameters
1. Stainless steel spreading roller: φ100mm*3pcs, wrapping wire φ4mm, round wire or flat wire
2. Motor power: 750W*2pcs(subject to the width)
3. Infrared control system: 1 set(various options)
4. Centering correction drive: cylinder-driven, pneumatic pressure 3kgf/c㎡
5. Power supply: three phase 380V AC 50 Hz
6. Installed capacity: dynamic 1.5KVA
HT3000 IoT HMI
On the basis of satisfying functions of general HMI, HT3000 series HMI can also perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP.
HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map.
The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices.
The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for
“IoT Bus” for free download through the major APP application stores.
On the basis of satisfying functions of general HMI, HT3000 series HMI can also perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP.
HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map.
The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices.
The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for
“IoT Bus” for free download through the major APP application stores.
1. 16 million true color TFT LCD, LED backlight, rich and real content. 4G Flash + 512M RAM.
2. Integrated HNC Cloud service, built-in HNC cloud engine. Support serial port / U disk / SD card / Ethernet / HNC cloud and other methods of program download.
3. Support third-party SCADA software programming management. Support cloud/mobile phone access control, strong operability.
4. Innovative A/B Key security mechanism, multilingual automatic translation, mobile payment support, weather forecast display.
5. Multi-screen networking. The innovative network networking method is easy, fast, convenient and practical. Support multiple terminal size screen custom display, multi-screen interactive management.
6. Support MQTT protocol. Can be connected to the database server, easily realize data collection and reporting, and dock with ERP/MES and other systems.
7. Support cloud transparent transmission. Can remotely program, upload and download, firmware upgrade, diagnosis, monitoring and debugging PLC program. Detect on-site abnormal conditions anytime and anywhere.
8. Support edge computing. Realize edge computing through the built-in script engine, function calculation, and interaction with device data in the terminal.
9. Support multiple third-party protocols. Built-in a variety of industrial equipment drivers, support the current mainstream PLC,VFD, instruments.
10. Integrated cloud access & alarm push, You can easily perform remote cloud access control on local or remote HMI devices through cloud APP and cloud website. Real-time abnormal monitoring alarm, the alarm information is pushed to the designated management personnel in real-time. Alarm notifications can be received via mobile APP, SMS, etc.
Reviews
There are no reviews yet.