INFRARED CENTERING EQUIPMENT
Product Description
Infrared centering machine device is a new product integrating light, machine and electricity. This device is widely used in printing and dyeing industry, setting machines, singeing machines, washing machines, drying machines, printing machines and other mechanical equipment. It has a strong center correction function, which can quickly and steadily correct the deviation of the symmetrical position of the fabric axis without being affected by the material and thickness of the fabric. It has the function of expanding the wrinkles of the fabric to ensure that the fabric is flat and centered. Processing Equipment.
Product description
The infrared centering equipment is a new product integrated with optical,mechanical and electronic technologies which is widely applied to setting machine,singeing machine,washing machine,drying machine and printing machine of the printing and dyeing industry.The equipment has a strong ability of central correction which can correct the deviation of axisymmetric position of the fabric fast and smooth without the influence of the fabric material and thickness.The equipment also has the ability of tightening the creases of the fabrics which can promise the fabrics entering the processing equipment smooth and medially .
Performance characteristics
1. Three spreading rollers can fully unfold the fabric; the contact surface between the fabric and the spreading roller can be easily adjusted.
2. Infrared detector, full-frame non-contact detection of fabric deviation;
3. The cylinder drives the correction roller to keep the fabric stably in the middle position;
4. Convenient operation, sensitive action and reliable operation.
Performance features
1. The three pieces of spreading rollers can unfold the fabric fully; the contract surface between fabric and spreading rollers can be adjusted easily.
2. The infrared detector can detect the deviation of full width fabric contactlessly.
3. The cylinder-driven roller can locate the fabric in the middle position steadily.
4. Easy operation, sensitive action, reliable performance.
Product parameter
1. Stainless steel expanding roller: φ100mm*3, winding wire φ4mm, round wire or flat wire
2. Motor power: 750W*2 sets (depending on the door width)
3. Infrared control system: one set (many types to choose from)
4. Alignment correction drive: cylinder drive, air pressure 3kgf/c㎡
5. Power supply: three-phase 380V AC 50Hz
6. Installed capacity: dynamic 1.5KVA
Technical parameters
1. Stainless steel spreading roller: φ100mm*3pcs, wrapping wire φ4mm, round wire or flat wire
2. Motor power: 750W*2pcs(subject to the width)
3. Infrared control system: 1 set(various options)
4. Centering correction drive: cylinder-driven, pneumatic pressure 3kgf/c㎡
5. Power supply: three phase 380V AC 50 Hz
6. Installed capacity: dynamic 1.5KVA
Reviews (0)
You must be logged in to post a review.
Related products
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
Description:
DUST CLEANING MACHINE
BRUSHING MACHINE TYPE SP200X2 FOR KNITS FABRICS
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Dust Cleaning Brushing machines, Type SP200X2 with;
Inlet with adjustable tensioning bar;
Double adjustable expander unit with Two motorized scroll rollers adjustable at 360°;
Centering device type “Slatted drum” with feeding motor and photocells for centering;
Individual motor for each brush;
2 sets of beaters rollers made by stainless steel star-shape;
2 sets of Horse hair brushes made by straight bars bristles shape;
Electric actuators for brush distance position. ( EXCLUSIVE FROM CARU’)
Transparent windows for easy access in to the machine;
Electric panel with inverter for fabrics drive;
Distance sensor for no-tension control of the running fabrics with accumulation cradle ( EXCLUSIVE INNOVATION FROM CARU’);
Outlet motor roller with plaiter unit at outlet ;
Complete suction, with motor-fan and filter bags unit;
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
Description:
LINT/ DUST REMOVAL MACHINE
SP200 x 2 for woven fabrics
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
This brushing/cleaning machines is an efficient group easily applicable
to any other machine or in a line of processing machines.
Its dimension let it to be suitable for different applications.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Machine suitable for heavy woven fabrics as denim, home textile fabrics.
Individual motor for each brush;
4 sets of nylon hair brushes made of helical bristles shape;
High pressure motor fan for air-blades;
2 set of high pressure air-blades;
4 ionized bars positioned inside the air-blades;
Windows for easy access inside the machine;
Load cell or dancing roller for tension control of fabrics;
Electric panel with inverters control for fabric pulling and speed of brushes;
Batching roller at outlet;
Complete suction unit, with motor-fan and filter bags ;
RAISING MACHINE DOUBLE DRUM [2G28 ]
RAISING MACHINE DOUBLE DRUM [2G28 ]
Description:
HIGH SPEED DOUBLE DRUM RAISING MACHINE
The 2G28 raising machine has been recently renewed and equipped with the latest components and knowledges.
In the 2G28 machine, the main objective was to create a versatile and complete machine, capable of facing and therefore
facilitating all the problems related to the raising process of all types of fabrics.
The design of the new range of our raising machines, was carried out according to the most modern design methods,
thus allowing the creation of a product that, on the market, is placed in the range of high performance machines.
This machine is suitable for Knits in open width and tubolar form.
Characteristics:
RAISING MACHINE DOUBLE DRUM [2G24 ]
RAISING MACHINE DOUBLE DRUM [2G24 ]
Description:
RAISING MACHINES FOR WOVEN AND KNITTING FABRICS WITH DOUBLE DRUMS
DOUBLE DRUMS WITH 24 ROLLERS . The raising machine 2G24 is controlled by PLC, with operator interface by Color Touch Screen and inverters controlled.Machine can process any kind of fabrics from natural or synthetic fibres and is available with 24 + 24 raising rollers,widths from mm.1800 to mm.3600; The machine has metallic cleaning brushes in synchronization with the drum; The metallic brushes are use for cleaning and sharpening of the raising fillet and allow raising fillets last longer.
Characteristics:
The 2G24 raising machine has been recently renewed and equipped with the latest components and knowledges.
In the 2G24 machine, the main objective was to create a versatile and complete machine,
capable of facing and therefore facilitating all the problems related to the raising process of all types of fabrics.
The design of the new range of our raising machines, was carried out according to the most modern design methods,
thus allowing the creation of a product that, on the market, is placed in the range of high performance machines.
Innovative, high-performance, sturdy and very reliable raising machines made in the name of technological innovation at the service of an increasingly demanding clientele but always in accordance with our sixty-year construction experience.
LASER ENGRAVING [LS100]
LASER ENGRAVING [LS100]
Description:
LASER ENGRAVING MACHINE LSC100 激光雕刻机
ENGRAVING MACHINE SUITABLE FOR RUBBER ROLLER AND RUBBER SLEEVES.
Laser engraving machine type LSC120
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
PLC Control, Touch-Screen;
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
Reviews
There are no reviews yet.