H-BOX
H-BOX is an IoT terminal device, it supports all the functions of the HT3000 except that it has no screen, you can use mobile phone, PAD, PC as its screen. Perfectly realize all functions of IoT through HNC cloud platform, cloud engine and cloud APP.
HNC Cloud is a cross-platform industrial Internet of Things cloud platform that supports PC, iPad, Android,and iOS multi-platform terminals. Simply put, HNC Cloud is a complete set of cloud service solutions forthe automation industry. It covers HNC Cloud website, cloud configuration, cloud HMI, cloud APP and other products. Through the HNC cloud platform, users can remotely access machines and equipment on the site thousands of miles away, realize remote monitoring and maintenance of HMI and PLC, realize remote programming, firmware upgrade, diagnosis, monitoring and debugging, etc. In summary, the HNC cloud platform has 9 major Features, it can help users realize the functions of cloud networking, cloud access, cloud video, cloud alarm, cloud engine, cloud management, cloud security, cloud translation and cloud map.
The HNC Cloud provides a secure communication mechanism. It uses 128-bit SSL encryption to ensure stable data transmission. A-Key and B-Key protection mechanisms are also set up on the device side to ensure the safety and reliability of remote access devices.
The IoT BUS APP supports iPad, Android, and iOS multi-platform terminals. Users can search for “IoT Bus” for free download through the major APP application stores.
Related products
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
S330 Pattern sueding
S330 Pattern sueding
Description:
The new Caru’ Pattern sueding technology, with the very latest technical features combined with modern control equipment and electronics, provides the technical process conditions that are expected of such a process today. The new model S330 Pattern Sueding machine to be shown at last ITMA 2015 in Milan, will incorporate new features achieving the above targets. Already many S330 machines are running in large factories worldwide. Perfect the art of fabric patterning with Caru’ solutions for any kind of, which feature are the most advanced technology in the field. Whether richly patterned dress or tie fabrics, upholstery fabrics, damask fabrics, sportswear, labelling or sophisticated technical textile, with Caru’ machines you can produce a creative and profusely diverse assortment of high quality woven and knits of both and synthetic fibers. The sueding machine S330 is made up of one sueding roller which is contrasted to a roller covered with rubber, let's to suede all kind of fabrics. This machine can suede woven, knit fabric and other materials as non wovens, denim, outwear, swimwear, sportwear, lingerie,used also in home textile and automotive fields, as imitation leather and nonwoven fabric so as to obtain finished products of excellent quality. Particular is the possibility to make sueded drawings on fabric, this technology is called PATTERN SUEDING, that is by means of a rubber roller that has been engraved with drawings which has to be reproduced on the surface.
THEATER UPHOLSTERY
IN MILAN
The Pattern Sueding can be utilized for handling a wide range of product and also incorporates many design features, how will use it up to your need of creativity in sueding.
Unleash your passion to create imaginative fabric designs.
Characteristics:
COTTON, VELVET, POLYESTER KNITS, DENIM, SATIN AND ALL NATURAL AND SYNTETIC FABRICS
Options:
EASY SUPREME TOUCH 8.1(SMART SYSTEM) SUEDING MACHINE
NEW EASY SUPREME TOUCH 8.1 SMART SYSTEM [Enhancement, knowledge and innovation.]
Description:
MACHINE WITH INNOVATIVE TENSION CONTROL SYSTEM
NEW SUEDING MACHINE EASY SUPREME TOUCH 8.1 SMART
THE ULTIMATE NOVELTIES
The long experience gained in sueding, along with the close co-operation with customers, enabled Caru' to set up a specific machines making technique,
having the first-rate production as final target to achieve the highest quality in fabric finishing.
The new machine "EST 8.1" is a SUEDING MACHINE having 8 sueding rollers full covered of diamong emery,
8 (height) Sueding rollers with a Diam. of 200mm dynamically balanced with clamping/tensioning device for abrasive tape. Abrasive brushes can also be use.
Process fabrics with 8 sueding rollers on one side of the fabrics or 4 sueding rollers on right side and 4 sueding rollers on back side of the fabric.
Sueding rollers NO. 1 – 3 – 6 – 8, are provide with oscillating motion system.
Jointless Diamond tapes;One entire belt, high resistancy, it can be
reinstalled on the roller many times and every time without be damaged.
In all Caru's machines,the sueding rollers can be made in light weight composite carbon fibre, which are more light and strong, giving advantage of high rotary speed and assure a perfect stability.
Characteristics:
Diamond and Abrasive brushes can be used in this machine.
Rice Husk Fired(rice mill) Boiler
Chain Grate Coal or Biomass Boiler
Coal biomass fired boiler | Solid fuel fired boiler | Grate stoker boiler
Chain grate boiler is a fully automatic coal/biomass fired boiler, can produce steam/hot water as transfer medium, grate combustion, adopts water&fire tube structure, high steam quality, anti coking, and sufficient output, etc.
Output: steam, hot water
Thermal Capacity: 500-40,000kg/hr 120-28,000kw/h
Styles: horizontal/vertical
Available Fuel: solid fuel, coal, biomass, wood, palm shell, husks etc
Applied Industries: food, beverage, diaries, feed mill, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
Working Pressure 0-2.5 mpa
Washing Range after printing/Dyeing
Washing Range
LASER ENGRAVING [LS100]
LASER ENGRAVING [LS100]
Description:
LASER ENGRAVING MACHINE LSC100 激光雕刻机
ENGRAVING MACHINE SUITABLE FOR RUBBER ROLLER AND RUBBER SLEEVES.
Laser engraving machine type LSC120
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
PLC Control, Touch-Screen;
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
Reviews
There are no reviews yet.