Proximity Sensor
Complete model: Capacitive / Inductive / Hall in Square and cylindrical sensor. Can detect metal, non-metal, magnet and other materials, such as:
Cylindrical Diameter: 4mm/5mm/8mm/12mm/18mm/30mm
Detection distance: 1mm/1.5mm/2mm/4mm/5mm/8mm/10mm/15mm
Proximity sensors are a general term for sensors that replace contact detection methods such as limit switches and travel switches, and monitor objects without contacting the detection object. He can convert the movement information and presence information of the detection object into electrical signals.
- Suitable for multiple applications with high performance
- Metal case for easy installation and protection
- Brilliant indicator light for easy viewing of work status
- Internal glue, fixed circuit board, good shock resistance
- Optimized circuit design, good EMC performance
- The wrong polarity of the power supply will not damage the product
Related products
Vacuum Hot Water Boiler
Vacuum Hot Water Boiler
Boiler with oil/gas burner | Central heating boiler | Boiler for heating
Vacuum hot water boilers also named vacuum phase change hot water boiler. There is a vacuum condition inside, fill heat medium water in furnace and heat these water through oil/gas. Through heat exchange, the heat inside the boiler is transfered to outside water.
Transfer medium: hot water
Thermal Capacity: 0.3-7 mw 300-7,000 kw/h 200,000-6,000,000 Kcal/h
Efficiency: 99.9%
Available Fuel: heavy oil, diesel, furnace oil, biogas, NG, CNG, LNG, LPG, dual fuel
Applied Industries: heating & drying like: food, beverage, wood chamber, greenhouse, building heating, hotel, school, etc
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
5473 stenter setting machine
5473 stenter setting machine
Electric Steam Boiler
Electric Steam Boiler
Electric steam generator boiler | Horizontal electric boiler | Eco-friendly boiler
Horizontal electric automatic boiler is a kind of 99.8% efficiency which takes electricity as energy. It has the advantages of environmental protection, no pollution, no noise, convenient installation, small occupation
Output: steam
Thermal Capacity: 0.2ton/h-4ton/h 100kg/h-4000kg/h
Styles: horizontal or vertical
Powered by: electricity
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
Easy-Supreme Touch 6.2 Sueding Machine
Easy-Supreme Touch 6.2
Description:
SUEDING MACHINE EASY- SUPREME TOUCH 6.2 FOR SUEDING/BRUSHING & DIAMOND FINISHING
Caru’ introduced in the market the last version of the new EASY SUPREME TOUCH 6.2 with innovative features; The EASY SUPREME TOUCH 6.2 is a machine using abrasive brushes and diamond emery in combination; 6 units of brushes or sueding rollers are the standard setting, extendable to 8 units on requirement. Sueding is a very complex process influenced by several parameters and the results are not only gauged by the touch assessment but also from the visual assessment, an high level of reproducibility and flexibility are also required nowadays.
THE COMPLETE MACHINE FOR YOUR PRODUCTION.
Characteristics:
THE ULTIMATE NOVELTIES
The long experience gained in sueding, along with the close co-operation with customers, enabled Caru' to set up a specific machines making technique,
having the first-rate production as final target to achieve the highest quality in fabric finishing.
The NEW sueding & brushing machine EASY- SUPREME TOUCH 6.2" can use abrasive brushes or sueding rollers
covered with emery, paper or diamond. The machine can be use in combination giving special range of different effects
Brushes or sueding rollers which rotate at a variable speed lets to obtain excellent sueding results
both on knitted and on woven fabrics.
This machine is characterised by its high sueding efficiency due to a considerable number of contact-points and adjustments.
Right and reverse side of the fabric can be processed on one passage.
Diamond tape are made without joint, on one entire belt very strong and resistent that can be
reinstalled on the roller many times and every time without be damaged.
As on all Caru's machines, the sueding rollers can be made in light weight composite carbon fibre, which are more light and
strong, giving advantage of high rotary speed and assure a perfect stability.
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
Reviews
There are no reviews yet.