Brand
Mazza Gianni
CYLINDER BRUSH FOR PRINTING MACHINE
Description
These cylinder brush are able to remove the traces of colour left on carpets during the printing phase
Manufacturing Features
- Internal part tube in steel
- Heads and pivots in steel or inox, shrinking on. The pivots are rectified and if required, they are fixed by screws in order to facilitate the substitution
- There is a special covering for the tube in steel in order to avoid the corrosion due the chemical agents
- The bristle disposition can be full, helical and bi-helical
- Normally trimmed with bristles in nylon, but on request, it can be supplied with any other kind of material
- Turned and levelled surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Related products
Stepless pressure regulation S-Roll calender(Double side pressure type)
Double side pressure type
Double side pressure type stepless pressure regualtion S-Roll calender combined with double-pressure technology and uniform stepless pressure roller technology, the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs.
Product advantages：1.Nominal width: 1800-3600mm
2.Working speed: 20-70m / min
3.Design pressure: 60-100T
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
Film calender (double side pressure three roller calender)
Film calender (double side pressure three roller calender)
This machine can be applied to pure cotton, chemical fiber, hemp, wool spinning and blended fabric calendering finishing;the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs.
Product advantages：1.Nominal width: 1800-5000mm
2.Working speed: 20-70m / min
3.Design pressure: 60-120T
Reviews
There are no reviews yet.