CUTTER CYLINDER
Description
The aim of this cylinder is the cutting and the elimination of the yarns that aren’t levelled by the shearing machineManufacturing Features
- Manufactured in tube in a special steel, rectified and chromium-plated
- Pivots rectified and shrinking on
- Blades support in stainless steel
- Cutter applied following the working need
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balancing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations vibration
- Maximum simplicity in the substitution of the damaged cutters
- Long working life even in hard exercise conditions
CYLINDER BRUSH FOR PRINTING MACHINE
Description
These cylinder brush are able to remove the traces of colour left on carpets during the printing phaseManufacturing Features
- Internal part tube in steel
- Heads and pivots in steel or inox, shrinking on. The pivots are rectified and if required, they are fixed by screws in order to facilitate the substitution
- There is a special covering for the tube in steel in order to avoid the corrosion due the chemical agents
- The bristle disposition can be full, helical and bi-helical
- Normally trimmed with bristles in nylon, but on request, it can be supplied with any other kind of material
- Turned and levelled surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
CYLINDER BRUSH FOR REASING MACHINE IN EXTRUSION IN ALVEOLAR ALUMINIUM
Description
The aim of this cylinder is the cleaning of the reasing cylinder. With this new brush typology it has been possible to insert the simple interchangeability of the damaged brush plates, by reducing in a satisfactory way the stop of the machine and, in the meanwhile, it has been inserted a new support concept in alveolar aluminium that reduces notably the mass in rotation.Manufacturing Features
- Internal part in alveolar aluminium patented
- Pivots in steel, rectified, and shrinking on
- Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the function al features and of the safety regulations
Functional Features
- Dynamic balancing with certification related to the speed required by the Customer
CYLINDER BRUSH WITH THERE STAVES FOR THE RAISING MACHINE
Description
The aim of this cylinder is the cleaning of the teasiling cylinder. With this new brush typology, it has been possible to insert the simple interchangeability, of the damaged brush plates, by reducing in a satisfactory, way the stop of the machine and it has been possible to insert brushes with elevated heights until 4600mm. Thanks to the special antivibrating element that makes them more rigid and more compactManufacturing Features
- Internal part in tube in special steel
- Special antivibrating element
- Pivots in steel, rectified and shrinking on
- Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, gran the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balancing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
- Maximum simplicity in the substitute on the damaged brush plates
- Long working life even in hard exercise conditions
RIBBONS BRUSH TRIMMED
Description
The aim of these ribbons is the interchange ability simplicity, at the present in use both for the teasiling machine and for the wool carding machines and for the other workings where there is the need of an immediately replacementManufacturing Features
- Manufatured with a special base, with more levels, that allows to avoid deformations during the working phases
- The trimming can be with the application of horse hair, bristle, nylon, tampico
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Application simplicity on any surface, circular of flat
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations
- Long working life even in hard exercise conditions