Brand
Mazza Gianni
RIBBONS BRUSH TRIMMED
Description
The aim of these ribbons is the interchange ability simplicity, at the present in use both for the teasiling machine and for the wool carding machines and for the other workings where there is the need of an immediately replacement
Manufacturing Features
- Manufatured with a special base, with more levels, that allows to avoid deformations during the working phases
- The trimming can be with the application of horse hair, bristle, nylon, tampico
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Application simplicity on any surface, circular of flat
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations
- Long working life even in hard exercise conditions
Reviews (0)
You must be logged in to post a review.
Related products
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
AS4 Wet & Dry sueding
AS4 Wet & Dry sueding
Description:
WET & DRY SUEDING MACHINE AS4
The AS4 is a sueding machine that is caracterized by an high versatily
because lets suede both on wet and dry condition;
This machine is using four light weight composite carbon fibre roller, that assure a perfect balance and high resistence.
On this machine it is possible to use waterproof emery cloth or diamond tape to cover all the sueding rollers.
Machine can works in combination of brushes.
MAIN FEATURES
Dry fabric feeding, wetting unit with squeezer roller and water tank, flow water on each sueding roller, high squeezing unit at outlet.
Four reversibile, indipendent, inverter controlled sueding and brush rollers each with oscillating motion.
Fabric interference angle independently adjustable for each suede/brush roller.
Emery tape clamping by means of an exclusive, patent pneumatic device.
Automatic, adjustable seam passage system to get the lowest length of untreated fabric.
Rice Husk Fired(rice mill) Boiler
Chain Grate Coal or Biomass Boiler
Coal biomass fired boiler | Solid fuel fired boiler | Grate stoker boiler
Chain grate boiler is a fully automatic coal/biomass fired boiler, can produce steam/hot water as transfer medium, grate combustion, adopts water&fire tube structure, high steam quality, anti coking, and sufficient output, etc.
Output: steam, hot water
Thermal Capacity: 500-40,000kg/hr 120-28,000kw/h
Styles: horizontal/vertical
Available Fuel: solid fuel, coal, biomass, wood, palm shell, husks etc
Applied Industries: food, beverage, diaries, feed mill, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
Working Pressure 0-2.5 mpa
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
Description:
DUST CLEANING MACHINE
BRUSHING MACHINE TYPE SP200X2 FOR KNITS FABRICS
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Dust Cleaning Brushing machines, Type SP200X2 with;
Inlet with adjustable tensioning bar;
Double adjustable expander unit with Two motorized scroll rollers adjustable at 360°;
Centering device type “Slatted drum” with feeding motor and photocells for centering;
Individual motor for each brush;
2 sets of beaters rollers made by stainless steel star-shape;
2 sets of Horse hair brushes made by straight bars bristles shape;
Electric actuators for brush distance position. ( EXCLUSIVE FROM CARU’)
Transparent windows for easy access in to the machine;
Electric panel with inverter for fabrics drive;
Distance sensor for no-tension control of the running fabrics with accumulation cradle ( EXCLUSIVE INNOVATION FROM CARU’);
Outlet motor roller with plaiter unit at outlet ;
Complete suction, with motor-fan and filter bags unit;
DUST CLEANING BRUSHING MACHINES
DUST CLEANING BRUSHING MACHINES
Description:
LINT/ DUST REMOVAL MACHINE
High power brushing machines suitable for all fabric cleaning operations, where traditional brushes can not obtain positive effects.
Clean using ionizing air flow technology.
Neutralizes Surface Charges
The machine is equipped with 4 high pressure air-blades, each one with individual motor-fan;
Each air-blade has one ionized bar to ionize the air flow blowing on fabrics.
This system remove the static from fabrics making easy to remove surface particles dust.
Individual motor for each brush;
4 sets of nylon hair brushes made of helical bristles shape;
2 High pressure motor fan for air-blades;
4 set of high pressure air-blades;
4 ionized bars positioned inside the air-blades;
Windows for easy access inside the machine;
Load cell or dancing roller for tension control of fabrics;
Electric panel with inverters control for fabric pulling and speed of brushes;
Batching roller at outlet;
Complete suction unit, with motor-fan and filter bags ;
Reviews
There are no reviews yet.