ZJ-TB2018 Servo Edge Detection All-in-one Machine ALL-IN-ONE SERVO EDGE DETECTING EQUIPMENT
Product Description
The ZJ-TB2018 infrared servo edge detector is used in textile, light industry and chemical industry. It is usually installed in the setting machine, stenter, coating machine, flocking machine, etc. When the fabric enters the equipment, Both sides of the fabric must be incorporated into the needle plate or cloth clip. When the edge position of the fabric is constantly changing, the infrared edge detection device can adjust the position of the needle plate chain rail, so that the cloth edge is correctly incorporated into the needle plate, so that the edge of the processed fabric is The needle width is maintained well.
ZJ-TB2018 is an “integrated edge detection device” with vertical control loops on the left and right sides. It sets a new standard for high-speed production of needles, with a simplified structure, real-time detection with a CCD infrared sensor with a resolution of 0.1mm, and needles on the ground at the edge of the cloth. By driving the track of the setting machine by the motor on the row of teeth, this edge detector is easy to use even in harsh environments.
Whether you are installing or refitting new or old equipment, you can make your equipment run smoothly at high speed and have good productivity.
Product description
ZJ-TB2018 model servo edge detecting all-in-one equipment is widely applied in the textile,light and chemical industries which is usually installed in the feeding area of the setting machine,spreading machine,coating machine and flocking machine.When the fabric is entering the equipment,the two sides of the fabric must be set into the faller bar or clip accurately .When the edge position of the fabric in the feeding area is changing, the edge detecting equipment can adjust the position of the faller bar chain .This can promise the fabric edge setting into the faller bar correctly to keep the needle width always same of the fabric edge while processing.
ZJ-TB2018 model is the original one called all-in-one edge detecting equipment in China which have two independent control circuits on the left and right sides.It has established a new standard for needling fabric edge accurately in the high-speed production. The equipment with simplified structure ,going with real-time detecting CCD infrared electric eye with 0.1mm resolution ratio ,ensures the fabric edge needle accurately.Through the action of motor driving track of the setting machine on the toothrow, this equipment also durable in use even under severe environments.
Your new or old machine installed or modified will have a stable and high-speed working performance leading to an improved productivity.
Reviews (0)
You must be logged in to post a review.
Related products
CYLINDER BRUSH
Description
The aim of these brushes is the cleaning, the polishing of the fabric during the different working phases, especially in the working and in the finishing of the fabrics in woolManufacturing Features
- Internal part in tube in stell
- Pivots in steel, shrinking on
- Covered with tube in moplen
- Trimmed with horse hair, bristle, nylon, tampico
- The bristle disposition can be full, helical, bi-helical
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balacing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
- Long working life even in hard exercise conditions
CYLINDER BRUSH WITH THERE STAVES FOR THE RAISING MACHINE
Description
The aim of this cylinder is the cleaning of the teasiling cylinder. With this new brush typology, it has been possible to insert the simple interchangeability, of the damaged brush plates, by reducing in a satisfactory, way the stop of the machine and it has been possible to insert brushes with elevated heights until 4600mm. Thanks to the special antivibrating element that makes them more rigid and more compactManufacturing Features
- Internal part in tube in special steel
- Special antivibrating element
- Pivots in steel, rectified and shrinking on
- Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, gran the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balancing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
- Maximum simplicity in the substitute on the damaged brush plates
- Long working life even in hard exercise conditions
HV580L Series Elevator Inverter
HV580L series frequency inverter is the professional for elevator of HNC. It concludes below improvement & innovation based on the ordinary V/F inverter. With the high-end design and high quality and reliability, HV580 series inverter will bring the users all new experience.
-
1. Smooth ride performance
-
2. Integrated brake control
-
3. Default factory setting user friendly factory, get you started quickly.
-
4. 4-Indepenent S-Ramps
-
5. Programmable DC –injection braking
-
6. Complete functions for elevator application
Proximity Sensor
Complete model: Capacitive / Inductive / Hall in Square and cylindrical sensor. Can detect metal, non-metal, magnet and other materials, such as:
Cylindrical Diameter: 4mm/5mm/8mm/12mm/18mm/30mm
Detection distance: 1mm/1.5mm/2mm/4mm/5mm/8mm/10mm/15mm
Proximity sensors are a general term for sensors that replace contact detection methods such as limit switches and travel switches, and monitor objects without contacting the detection object. He can convert the movement information and presence information of the detection object into electrical signals.
- Suitable for multiple applications with high performance
- Metal case for easy installation and protection
- Brilliant indicator light for easy viewing of work status
- Internal glue, fixed circuit board, good shock resistance
- Optimized circuit design, good EMC performance
- The wrong polarity of the power supply will not damage the product
HSV-180AD AC380V Servo Drive
HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
...................................................................FEATURES..........................................................................
- High Performance AC digital servo drive
- Easy and flexible control (five control modes)
- Full state display
- Various interface and control modes
- Applicable to situations that requires high speed and high power
- Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
HHS Series High Performance Soft Starter
HHS series of soft starter is the latest development of HNC has an international leading technology of intelligent AC motor soft starter. HHS Series Soft Starter uses the power electronic technology, the microprocessor technology and the modern control theory technology, has the present international advanced level the new starting equipment. This product can effectively limit the starting current of asynchronous motor, which can be widely used in fan, water pump, compressor and other transportation and heavy equipment, is the star delta conversion, autotransformer, magnetron step-down start ideal replacement equipment.
HHS series of soft starter has excellent performance with the international high-end soft starter of the same, further strengthen the product reliability and environmental adaptability, humanization and professional design, can meet various application requirements.
......................................................................FEATURES........................................................................
1. Multi start mode: The maximum output torque can be obtained by the voltage ramp mode. The maximum current can be obtained by the constant current soft starter mode, which can be applied to the load with large static friction force 2. High reliability: The high performance microprocessor is used to process the signal in the control system, so as to avoid the excessive adjustment of the analog circuit in the past, so as to obtain excellent accuracy and execution speed 3. High performance: Programmable delay start mode, programmable interlocks control No sequence requirements for input power Starting time, parking time can be modified Dynamic fault memory function, easy to find the cause of the fault, up to ten faults can be recorded 4. Field bus full dynamic control monitoring starter, easy networking: Bus type is MODBUS. 5. Variety of protection functions: Protection against over voltage, under voltage, over temperature, phase loss, motor overload, etc.。 6. English character display function: LCD display a variety of operating parameters, programming and fault state with text prompts 7. Perfect humanized design: Beautiful appearance and reasonable structure Perfect function and simple operation Solid, reliable and compact The artistic design of industrial products 8. Reliable quality assurance: Computer simulation design STM patch production process Excellent electromagnetic compatibility High temperature aging, vibration test before the factory 9. Quick and thoughtful after-sales service: Reliable performance and quality lay the foundation for quality service Provide excellent and complete equipment design Timely and thoughtful use of consulting Continuously improve product performance according to user opinion.
ZJ-TB2008 Servo Edge Detection Device
Product Description
The ZJ-TB2008 infrared servo edge detector is used in the textile, light industry and chemical industries. It is usually installed in the setting machine, stenter, coating machine, flocking machine, etc. When the fabric enters the equipment, the fabric Both sides are incorporated into the needle plate or cloth clamp. When the position of the fabric edge is constantly changing, the infrared edge detection device can adjust the position of the needle plate chain rail, so that the cloth edge is correctly incorporated into the needle plate, so that the upper needle width of the processed fabric edge Keep the position aligned.
ZJ-TB2008 infrared servo edge detector has the characteristics of high sensitivity, strong interference, stable output, long service life, and low power consumption when using 220V power supply. Its two infrared sensors are suitable for different types of fabrics, for dark, light, thick, light and thin. Smooth or rough edges, loose or tight fabrics can be smoothly controlled.
The ZJ-TB2008 infrared device adopts a brand-new scheme and uses a servo motor drive, creating a new infrared edge detection controller. The servo motor is made of high working temperature, high magnetic energy and permanent magnet materials, and optimized electromagnetic design. The motor maintains excellent working conditions for long-term operation, has good low-speed characteristics, moderate motor inertia, and protection class IP65.
Whether you are installing or refitting new or old equipment, you can make your equipment run smoothly at high speed and have good productivity.
Product description
ZJ-TB2008 model servo edge detecting equipment is widely applied in the textile,light and chemical industries which is usually installed in the feeding area of the setting machine,spreading machine,coating machine and flocking machine.When the fabric is entering the equipment,the two sides of the fabric must be set into the faller bar or clip accurately .When the edge position of the fabric in the feeding area is changing, the edge detecting equipment can adjust the position of the faller bar chain .This can promise the fabric edge setting into the faller bar correctly to keep the needle width always same of the fabric edge while processing.
ZJ-TB2008 model servo edge detecting equipment has the advantages including high sensitivity, strong anti-interference ability, stable output and long service life and low consumption using 220V power supply. It has two infrared sensors applied to various kinds of fabrics, such as dark color, light color, thick weight, light weight, shape edge, rough edge, loose and tight ones and the fabrics can be controlled stably and efficiently.
ZJ-TB2008 model servo edge detecting equipment adopted the new project using servo motor drive to invent a new infrared edge detecting equipment. The servo motor only selects the superior permanent magnet material with high working temperature and high magnetic energy and is designed with optimized electromagnetism. The motor can keep an excellent working state even after a long-time operation, with good low-speed characteristic, moderate motor inertia and IP65 grade protection. Your new or old machine installed or modified will have a stable and high-speed working performance leading to an improved productivity.
Reviews
There are no reviews yet.