ZJ-TB2008 Servo Edge Detection Device
Product Description
The ZJ-TB2008 infrared servo edge detector is used in the textile, light industry and chemical industries. It is usually installed in the setting machine, stenter, coating machine, flocking machine, etc. When the fabric enters the equipment, the fabric Both sides are incorporated into the needle plate or cloth clamp. When the position of the fabric edge is constantly changing, the infrared edge detection device can adjust the position of the needle plate chain rail, so that the cloth edge is correctly incorporated into the needle plate, so that the upper needle width of the processed fabric edge Keep the position aligned.
ZJ-TB2008 infrared servo edge detector has the characteristics of high sensitivity, strong interference, stable output, long service life, and low power consumption when using 220V power supply. Its two infrared sensors are suitable for different types of fabrics, for dark, light, thick, light and thin. Smooth or rough edges, loose or tight fabrics can be smoothly controlled.
The ZJ-TB2008 infrared device adopts a brand-new scheme and uses a servo motor drive, creating a new infrared edge detection controller. The servo motor is made of high working temperature, high magnetic energy and permanent magnet materials, and optimized electromagnetic design. The motor maintains excellent working conditions for long-term operation, has good low-speed characteristics, moderate motor inertia, and protection class IP65.
Whether you are installing or refitting new or old equipment, you can make your equipment run smoothly at high speed and have good productivity.
Product description
ZJ-TB2008 model servo edge detecting equipment is widely applied in the textile,light and chemical industries which is usually installed in the feeding area of the setting machine,spreading machine,coating machine and flocking machine.When the fabric is entering the equipment,the two sides of the fabric must be set into the faller bar or clip accurately .When the edge position of the fabric in the feeding area is changing, the edge detecting equipment can adjust the position of the faller bar chain .This can promise the fabric edge setting into the faller bar correctly to keep the needle width always same of the fabric edge while processing.
ZJ-TB2008 model servo edge detecting equipment has the advantages including high sensitivity, strong anti-interference ability, stable output and long service life and low consumption using 220V power supply. It has two infrared sensors applied to various kinds of fabrics, such as dark color, light color, thick weight, light weight, shape edge, rough edge, loose and tight ones and the fabrics can be controlled stably and efficiently.
ZJ-TB2008 model servo edge detecting equipment adopted the new project using servo motor drive to invent a new infrared edge detecting equipment. The servo motor only selects the superior permanent magnet material with high working temperature and high magnetic energy and is designed with optimized electromagnetism. The motor can keep an excellent working state even after a long-time operation, with good low-speed characteristic, moderate motor inertia and IP65 grade protection. Your new or old machine installed or modified will have a stable and high-speed working performance leading to an improved productivity.
Reviews (0)
You must be logged in to post a review.
Related products
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
DUST CLEANING BRUSHING MACHINES
DUST CLEANING BRUSHING MACHINES
Description:
LINT/ DUST REMOVAL MACHINE
High power brushing machines suitable for all fabric cleaning operations, where traditional brushes can not obtain positive effects.
Clean using ionizing air flow technology.
Neutralizes Surface Charges
The machine is equipped with 4 high pressure air-blades, each one with individual motor-fan;
Each air-blade has one ionized bar to ionize the air flow blowing on fabrics.
This system remove the static from fabrics making easy to remove surface particles dust.
Individual motor for each brush;
4 sets of nylon hair brushes made of helical bristles shape;
2 High pressure motor fan for air-blades;
4 set of high pressure air-blades;
4 ionized bars positioned inside the air-blades;
Windows for easy access inside the machine;
Load cell or dancing roller for tension control of fabrics;
Electric panel with inverters control for fabric pulling and speed of brushes;
Batching roller at outlet;
Complete suction unit, with motor-fan and filter bags ;
RAISING MACHINE DOUBLE DRUM [2G24 ]
RAISING MACHINE DOUBLE DRUM [2G24 ]
Description:
RAISING MACHINES FOR WOVEN AND KNITTING FABRICS WITH DOUBLE DRUMS
DOUBLE DRUMS WITH 24 ROLLERS . The raising machine 2G24 is controlled by PLC, with operator interface by Color Touch Screen and inverters controlled.Machine can process any kind of fabrics from natural or synthetic fibres and is available with 24 + 24 raising rollers,widths from mm.1800 to mm.3600; The machine has metallic cleaning brushes in synchronization with the drum; The metallic brushes are use for cleaning and sharpening of the raising fillet and allow raising fillets last longer.
Characteristics:
The 2G24 raising machine has been recently renewed and equipped with the latest components and knowledges.
In the 2G24 machine, the main objective was to create a versatile and complete machine,
capable of facing and therefore facilitating all the problems related to the raising process of all types of fabrics.
The design of the new range of our raising machines, was carried out according to the most modern design methods,
thus allowing the creation of a product that, on the market, is placed in the range of high performance machines.
Innovative, high-performance, sturdy and very reliable raising machines made in the name of technological innovation at the service of an increasingly demanding clientele but always in accordance with our sixty-year construction experience.
5473 stenter setting machine
5473 stenter setting machine
LASER ENGRAVING [LS100]
LASER ENGRAVING [LS100]
Description:
LASER ENGRAVING MACHINE LSC100 激光雕刻机
ENGRAVING MACHINE SUITABLE FOR RUBBER ROLLER AND RUBBER SLEEVES.
Laser engraving machine type LSC120
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
PLC Control, Touch-Screen;
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
Sanforizing machine
Sanforizing machine
Reviews
There are no reviews yet.