XTEMOS ELEMENT
AJAX PRODUCTS TABS
HV590 Series FVC High Performance Frequency Inverter
New HV590 series is a general current vector control inverter integrated with the performance and features in a high degree. HV590 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control.
Customer success, Market Service！HV590 in terms of performance and control are worthy of trust!
....................................................................FEATURES.........................................................................
1.Advanced motor control technology support both Open loop vector control(SVC), Closed loop vector control(FVC) and V/F control.
2.Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).
3.High starting torque characteristics and precise speed control.
4.Rich and flexible I/O accesses and field bus options.
5.Suitable for all regions which have different grid and voltage.
6.Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) like elevator, textile etc.
7.Programmable DI/DO/AI/AO as well as RS485 Modbus RTU make easy communication with other devices.
Barco Sedo Profibus 16
Profi 16
External I/O modules
These units are part of the modular design initiative that enable our Sedomat controllers to operate using either their own I/O, remote I/O or an optimization of the two. These peripheral modules connect to the controllers using a PROFIBUS DP interface and offer both digital and analogue inputs and outputs. Both the Profi 16 and 32 were specialy designed fo the automation of textile finishing machines and are compatible with modules from other suppliers.Optimized for the use in textile finishing
Profibus DP:
PROFIBUS DP is a world wide accepted standard field bus for the connection of inputs, outputs, frequency inverters, PLC components, sensors, valves, remote displays etc. This standard industry bus has been chosen as part of our open connectivity strategy. The field bus concept significantly reduces the panel building overhead by eliminating a large part of the wiring. World wide, thousands of PROFIBUS DP ready peripherals are available so providing an enormous choice of components. This flexibility and freedom of choice will have a positive effect on performance and price of the machine automation. The PROFIBUS DP field bus is supported by Siemens, Klöckner Moeller, Mitsubishi, Matsushita, Allen-Bradley, Omron, Weidmüller, Wago, Lenze, KEB, Hitachi, Festo, Parker, etc.Concept:
- All inputs are equipped with green, all outputs with red LED’s.
- All inputs and outputs are optical isolated.
- 4 Status-LED’s showing the actual status.
- All connections equipped with plug-in terminals.
- Ready to use Profibus cable in desired length on request.
Specifications:
| Inputs: |
|
| Outputs: |
|
| Fieldbus: | Profibus DP Slave |
| Power supply: | 24V DC (19-32V) |
| Dimensions: | 243.3 x 133 x 54.6mm (w x h x d) |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Fashion
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
CYLINDER BRUSH WITH THERE STAVES FOR THE RAISING MACHINE
Description
The aim of this cylinder is the cleaning of the teasiling cylinder. With this new brush typology, it has been possible to insert the simple interchangeability, of the damaged brush plates, by reducing in a satisfactory, way the stop of the machine and it has been possible to insert brushes with elevated heights until 4600mm. Thanks to the special antivibrating element that makes them more rigid and more compactManufacturing Features
- Internal part in tube in special steel
- Special antivibrating element
- Pivots in steel, rectified and shrinking on
- Covered with staves in aluminium patented for the brush plates fixing in nylon or metallic
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, gran the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balancing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
- Maximum simplicity in the substitute on the damaged brush plates
- Long working life even in hard exercise conditions
CPB ( Cold Pad Batch) Machine
CPB ( Cold Pad Batch) Machine
LAPPING BRUSHES
Description
The aim of these bushes is to have a homogeneous lapping effect, avoiding any problems of rows and folds over the entire surface of the fabric.Manufacturing Features
- Manufactured with a tube of special steel
- The pins are ground and hot introduced
- A wide choice of grain and abrasive section
- The hole is specially arranged so to allow the tissue to remain stretched all the time
- Manufactured in accordance with the Costumer’s dimensions and features
- The materials and the machining processes we use are a guarantee for complying with the functional features and the safety standards
Functional Features
- Dynamic balance with certification, based on the speed requested by the Customer
- Longitudinal and torsion stiffness suitable for avoiding unwanted deformation and vibrations
- A high resistance of the abrasive bristles, even under hard working conditions and on several kinds of tissues
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Electronics
Clip / Roller Mercerizing Range
Clip / Roller Mercerizing Range
SHEARING MACHINE
UNIVERSAL SHEARING MACHINE WITH SINGLE SHEARING ROLLER. ADJUSTMENT CUTTING DISTANCE (0.02mm)
-TOUCH-SCREEN DISPLAY
-AUTOMATIC SEAM DETECTOR
-INVERTER CONTROL
SUITABLE TO PROCESS ALL KIND OF FABRICS
WORKING WIDTH 1800mm-3400mm
Shearing of all kinds of fabrics, woven, knitted and warp-knitted; High performance shearing.
Film calender (double side pressure three roller calender)
Film calender (double side pressure three roller calender)
This machine can be applied to pure cotton, chemical fiber, hemp, wool spinning and blended fabric calendering finishing;the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs.
Product advantages：1.Nominal width: 1800-5000mm
2.Working speed: 20-70m / min
3.Design pressure: 60-120T
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
PROXIMITY & PHOTOELECTRIC SENSOR
All type & brand proximity & photoelectric sensor.
HHS Series High Performance Soft Starter
HHS series of soft starter is the latest development of HNC has an international leading technology of intelligent AC motor soft starter. HHS Series Soft Starter uses the power electronic technology, the microprocessor technology and the modern control theory technology, has the present international advanced level the new starting equipment. This product can effectively limit the starting current of asynchronous motor, which can be widely used in fan, water pump, compressor and other transportation and heavy equipment, is the star delta conversion, autotransformer, magnetron step-down start ideal replacement equipment.
HHS series of soft starter has excellent performance with the international high-end soft starter of the same, further strengthen the product reliability and environmental adaptability, humanization and professional design, can meet various application requirements.
......................................................................FEATURES........................................................................
1. Multi start mode: The maximum output torque can be obtained by the voltage ramp mode. The maximum current can be obtained by the constant current soft starter mode, which can be applied to the load with large static friction force 2. High reliability: The high performance microprocessor is used to process the signal in the control system, so as to avoid the excessive adjustment of the analog circuit in the past, so as to obtain excellent accuracy and execution speed 3. High performance: Programmable delay start mode, programmable interlocks control No sequence requirements for input power Starting time, parking time can be modified Dynamic fault memory function, easy to find the cause of the fault, up to ten faults can be recorded 4. Field bus full dynamic control monitoring starter, easy networking: Bus type is MODBUS. 5. Variety of protection functions: Protection against over voltage, under voltage, over temperature, phase loss, motor overload, etc.。 6. English character display function: LCD display a variety of operating parameters, programming and fault state with text prompts 7. Perfect humanized design: Beautiful appearance and reasonable structure Perfect function and simple operation Solid, reliable and compact The artistic design of industrial products 8. Reliable quality assurance: Computer simulation design STM patch production process Excellent electromagnetic compatibility High temperature aging, vibration test before the factory 9. Quick and thoughtful after-sales service: Reliable performance and quality lay the foundation for quality service Provide excellent and complete equipment design Timely and thoughtful use of consulting Continuously improve product performance according to user opinion.
CYLINDER BRUSH
Description
The aim of these brushes is the cleaning, the polishing of the fabric during the different working phases, especially in the working and in the finishing of the fabrics in woolManufacturing Features
- Internal part in tube in stell
- Pivots in steel, shrinking on
- Covered with tube in moplen
- Trimmed with horse hair, bristle, nylon, tampico
- The bristle disposition can be full, helical, bi-helical
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balacing with certification related to the speed required by the Customer
- Longitudinal and torsional rigidity suitable for avoiding undesired deformations and vibrations
- Long working life even in hard exercise conditions
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
BENDCON-Y
This machine can be applied to cotton, chemical fiber, hemp, wool and its blended fabric finishing calendering; it can also be used for polypropylene, nylon, polyester, polyethylene, polypropylene and other materials and paper finishing calendering.
By adjusting the hydraulic valve inside the nylon roll, when the different pressure is applied to the roller surface, the nylon roller is automatically adjusted to achieve uniformity of the linear pressure of the entire nip. After calendering, the product can achieve much better effect of thickness, gloss and other uniformity than normal calendering. This machine can also withstand higher steel roller temperature and higher linear speed while operating.
Product advantages：1.Nominal width: 1800-3400mm
2.Working speed: 20-70m / min
3.Design pressure: 60-100T
Stepless pressure regulation S-Roll calender(Single pressure type)
Stepless pressure regualtion S-Roll calender has the following characteristics:
• Utilize the stepless pressure regulation S-Roll, achieve the uniform line pressure by adjusting the oil pressure in the two semi-circular chambers.
• The elastic roller sleeve coated on the stepless pressure regulation S-Roll roller can better recover the deformation of the roller.
• The S-Roll roller is controlled by hydraulic system.
• The S-Roll roller is auxiliary driven by oil motor.
• HMI ( Whole machine monitoring, Process parameter settings, Seam detection animated display, Hydraulic system pressure display, Fault diagnosis, Alarm information)
• Roller sleeve change is quick and easy, no need to have a large-scale demolition the sofy roller sleeve made of synthetic material cam be exchanged from the side pipe rack of the calender, to minimize the downtime. The sleeve can be selected in calendering process ( such as calendering, electro-optical, embossing, soft calendering and silk finishing).
Product advantages：
1.Nominal width: 1800-3600mm
2.Working speed: 20-70m / min
3.Design pressure: 60-100T
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
CORDUROY BLADE SHARPENING
CORDUROY BLADE SHARPENING
Description:
CORDUROY BLADES SHARPENING MACHINE;
The AFFI X model machine is used to grind and to sharp knives for cutting corduroy fabrics;
Two special hard diamond-coated grinding wheels turn at high speed to obtain an excellent knife sharpness.
The fine adjustment of the contact on the knife is done by the means of centesimal
positioning screws and a pneumatic system will perform a cycle in steps.
The machine is equipped with a device for the positioning, clamping and quick release of the knife.
CPB ( Cold Pad Batch) Machine
CPB ( Cold Pad Batch) Machine
Vacuum Hot Water Boiler
Vacuum Hot Water Boiler
Boiler with oil/gas burner | Central heating boiler | Boiler for heating
Vacuum hot water boilers also named vacuum phase change hot water boiler. There is a vacuum condition inside, fill heat medium water in furnace and heat these water through oil/gas. Through heat exchange, the heat inside the boiler is transfered to outside water.
Transfer medium: hot water
Thermal Capacity: 0.3-7 mw 300-7,000 kw/h 200,000-6,000,000 Kcal/h
Efficiency: 99.9%
Available Fuel: heavy oil, diesel, furnace oil, biogas, NG, CNG, LNG, LPG, dual fuel
Applied Industries: heating & drying like: food, beverage, wood chamber, greenhouse, building heating, hotel, school, etc
HV480 Series High Performance Frequency Inverter
New HV480 series is a general current vector control inverter integrated with the performance and features in a high degree. HV480 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control.
Detachable keyboard，support copy parameters by keypad, debugging software on PC, built-in EMC filter, reduce EMC interference, .ect. These optimized designs make HV480 series an industry-leading product and bring tangible benefits to customers.
Customer success, Market Service！HV480 in terms of performance and control are worthy of trust!
1. Advanced motor control technology support Open loop vector control(SVC) and V/F control.
2. Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).
3. High starting torque characteristics and precise speed control.
4. Rich and flexible I/O accesses and field bus options.
5. Suitable for all regions which have different grid and voltage.
6. Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) .
7. Programmable DI/DO/AI/AO, and Modbus RTU make easy communication with other devices.
8. Detachable keyboard，support copy parameters by keypad, support keyboard extension.
9. Debugging software, suitable for parameter set, waveform monitor, optimizing device performance.
10. Multi-pumps control, constant pressure water supply function.
11. Built-in EMC filter, reduce EMC interference , reduce malfunctions and improve accuracy.
12. Kinds of communication cards are available, Easy to integrate into the network to help Industry 4.0.