You must be logged in to post a review.
CYLINDER BRUSH FOR WOOL CARDING
Description
The aim of the carding is to realize the fibres separation, by releasing them from the impurities still present and by completing the opening and the cleaning started in the previous passages. The cylinder has to keep clean the carding rolls during the working process
Manufacturing Features
- Internal part in tube in steel
- Heads and pivots in steel shrinking on
- The pivots are rectified
- Covered with staves in wood
- Covered with jacket in aluminium
- Normally trimmed with bristles in tampico or in a special mixing, in order to eliminate the electrostatic electricity accumulation
- Turned and levelled external surface for a perfect circularity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the functional features and of the safety regulations
Functional Features
- Dynamic balacing with certification, related to the speed required by the Costumer
Category: Mazza Gianni
Tags: BRUSH, CYLINDER BRUSH FOR WOOL CARDING, Industrial brush, sueding machine, trl, trust
Related products
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
AS4 Wet & Dry sueding
AS4 Wet & Dry sueding
Description:
WET & DRY SUEDING MACHINE AS4
The AS4 is a sueding machine that is caracterized by an high versatily
because lets suede both on wet and dry condition;
This machine is using four light weight composite carbon fibre roller, that assure a perfect balance and high resistence.
On this machine it is possible to use waterproof emery cloth or diamond tape to cover all the sueding rollers.
Machine can works in combination of brushes.
MAIN FEATURES
Dry fabric feeding, wetting unit with squeezer roller and water tank, flow water on each sueding roller, high squeezing unit at outlet.
Four reversibile, indipendent, inverter controlled sueding and brush rollers each with oscillating motion.
Fabric interference angle independently adjustable for each suede/brush roller.
Emery tape clamping by means of an exclusive, patent pneumatic device.
Automatic, adjustable seam passage system to get the lowest length of untreated fabric.
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
Description:
LINT/ DUST REMOVAL MACHINE
SP200 x 2 for woven fabrics
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
This brushing/cleaning machines is an efficient group easily applicable
to any other machine or in a line of processing machines.
Its dimension let it to be suitable for different applications.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Machine suitable for heavy woven fabrics as denim, home textile fabrics.
Individual motor for each brush;
4 sets of nylon hair brushes made of helical bristles shape;
High pressure motor fan for air-blades;
2 set of high pressure air-blades;
4 ionized bars positioned inside the air-blades;
Windows for easy access inside the machine;
Load cell or dancing roller for tension control of fabrics;
Electric panel with inverters control for fabric pulling and speed of brushes;
Batching roller at outlet;
Complete suction unit, with motor-fan and filter bags ;
STRIPPING MACHINE FOR ROTARY SCREENS
STRIPPING MACHINE FOR ROTARY SCREENS [ERALASER]
Description:
This machine has been designed to strip printing rotary screens;
Direct laser beam is used to strip (to remove) the coated resin from the nickel screen surface.
LASER STRIPPING MACHINE , the machine is generally equipped for taking up screens of standard repeats of 640mm, 820mm, 914mm, 1018mm. Screen lenght upto 3700mm.
Characteristics:
PLC Control ; Touch-Screen; Single Beam Laser; Long Life Laser Source.
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation



Reviews
There are no reviews yet.