Related products
BENDCON-Y
This machine can be applied to cotton, chemical fiber, hemp, wool and its blended fabric finishing calendering; it can also be used for polypropylene, nylon, polyester, polyethylene, polypropylene and other materials and paper finishing calendering.
By adjusting the hydraulic valve inside the nylon roll, when the different pressure is applied to the roller surface, the nylon roller is automatically adjusted to achieve uniformity of the linear pressure of the entire nip. After calendering, the product can achieve much better effect of thickness, gloss and other uniformity than normal calendering. This machine can also withstand higher steel roller temperature and higher linear speed while operating.
Product advantages：1.Nominal width: 1800-3400mm
2.Working speed: 20-70m / min
3.Design pressure: 60-100T
Stepless pressure regulation S-Roll calender(Single pressure type)
Stepless pressure regualtion S-Roll calender has the following characteristics:
• Utilize the stepless pressure regulation S-Roll, achieve the uniform line pressure by adjusting the oil pressure in the two semi-circular chambers.
• The elastic roller sleeve coated on the stepless pressure regulation S-Roll roller can better recover the deformation of the roller.
• The S-Roll roller is controlled by hydraulic system.
• The S-Roll roller is auxiliary driven by oil motor.
• HMI ( Whole machine monitoring, Process parameter settings, Seam detection animated display, Hydraulic system pressure display, Fault diagnosis, Alarm information)
• Roller sleeve change is quick and easy, no need to have a large-scale demolition the sofy roller sleeve made of synthetic material cam be exchanged from the side pipe rack of the calender, to minimize the downtime. The sleeve can be selected in calendering process ( such as calendering, electro-optical, embossing, soft calendering and silk finishing).
Product advantages：
1.Nominal width: 1800-3600mm
2.Working speed: 20-70m / min
3.Design pressure: 60-100T
5473 stenter setting machine
5473 stenter setting machine
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
CPB ( Cold Pad Batch) Machine
CPB ( Cold Pad Batch) Machine
Sanforizing machine
Sanforizing machine
Reviews
There are no reviews yet.