Full-frame infrared centering electric eye
Related products
Diesel / Heavy Oil Boiler
Diesel / Heavy Oil Boiler
Yuanda Boiler since 1956
Oil fired boiler is the 3-pass wet back boiler, can produce steam or hot water. This type boilers are fully automatic, safe, energy saving and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Capacity: 0.5-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: heavy oil, diesel, furnace oil, waste oil, dual fuel, etc
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
S330 Pattern sueding
S330 Pattern sueding
Description:
The new Caru’ Pattern sueding technology, with the very latest technical features combined with modern control equipment and electronics, provides the technical process conditions that are expected of such a process today. The new model S330 Pattern Sueding machine to be shown at last ITMA 2015 in Milan, will incorporate new features achieving the above targets. Already many S330 machines are running in large factories worldwide. Perfect the art of fabric patterning with Caru’ solutions for any kind of, which feature are the most advanced technology in the field. Whether richly patterned dress or tie fabrics, upholstery fabrics, damask fabrics, sportswear, labelling or sophisticated technical textile, with Caru’ machines you can produce a creative and profusely diverse assortment of high quality woven and knits of both and synthetic fibers. The sueding machine S330 is made up of one sueding roller which is contrasted to a roller covered with rubber, let's to suede all kind of fabrics. This machine can suede woven, knit fabric and other materials as non wovens, denim, outwear, swimwear, sportwear, lingerie,used also in home textile and automotive fields, as imitation leather and nonwoven fabric so as to obtain finished products of excellent quality. Particular is the possibility to make sueded drawings on fabric, this technology is called PATTERN SUEDING, that is by means of a rubber roller that has been engraved with drawings which has to be reproduced on the surface.
THEATER UPHOLSTERY
IN MILAN
The Pattern Sueding can be utilized for handling a wide range of product and also incorporates many design features, how will use it up to your need of creativity in sueding.
Unleash your passion to create imaginative fabric designs.
Characteristics:
COTTON, VELVET, POLYESTER KNITS, DENIM, SATIN AND ALL NATURAL AND SYNTETIC FABRICS
Options:
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
Electric Steam Boiler
Electric Steam Boiler
Electric steam generator boiler | Horizontal electric boiler | Eco-friendly boiler
Horizontal electric automatic boiler is a kind of 99.8% efficiency which takes electricity as energy. It has the advantages of environmental protection, no pollution, no noise, convenient installation, small occupation
Output: steam
Thermal Capacity: 0.2ton/h-4ton/h 100kg/h-4000kg/h
Styles: horizontal or vertical
Powered by: electricity
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
Sanforizing machine
Sanforizing machine
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
DUST CLEANING BRUSHING MACHINE SP200 x2 for woven fabrics
Description:
LINT/ DUST REMOVAL MACHINE
SP200 x 2 for woven fabrics
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
This brushing/cleaning machines is an efficient group easily applicable
to any other machine or in a line of processing machines.
Its dimension let it to be suitable for different applications.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Machine suitable for heavy woven fabrics as denim, home textile fabrics.
Individual motor for each brush;
4 sets of nylon hair brushes made of helical bristles shape;
High pressure motor fan for air-blades;
2 set of high pressure air-blades;
4 ionized bars positioned inside the air-blades;
Windows for easy access inside the machine;
Load cell or dancing roller for tension control of fabrics;
Electric panel with inverters control for fabric pulling and speed of brushes;
Batching roller at outlet;
Complete suction unit, with motor-fan and filter bags ;
Reviews
There are no reviews yet.