You must be logged in to post a review.
Barco Sedo Profibus 16
Profi 16
External I/O modules
These units are part of the modular design initiative that enable our Sedomat controllers to operate using either their own I/O, remote I/O or an optimization of the two. These peripheral modules connect to the controllers using a PROFIBUS DP interface and offer both digital and analogue inputs and outputs. Both the Profi 16 and 32 were specialy designed fo the automation of textile finishing machines and are compatible with modules from other suppliers.
Optimized for the use in textile finishing
Profibus DP:
PROFIBUS DP is a world wide accepted standard field bus for the connection of inputs, outputs, frequency inverters, PLC components, sensors, valves, remote displays etc. This standard industry bus has been chosen as part of our open connectivity strategy.
The field bus concept significantly reduces the panel building overhead by eliminating a large part of the wiring.
World wide, thousands of PROFIBUS DP ready peripherals are available so providing an enormous choice of components. This flexibility and freedom of choice will have a positive effect on performance and price of the machine automation.
The PROFIBUS DP field bus is supported by Siemens, Klöckner Moeller, Mitsubishi, Matsushita, Allen-Bradley, Omron, Weidmüller, Wago, Lenze, KEB, Hitachi, Festo, Parker, etc.
Concept:
- All inputs are equipped with green, all outputs with red LED’s.
- All inputs and outputs are optical isolated.
- 4 Status-LED’s showing the actual status.
- All connections equipped with plug-in terminals.
- Ready to use Profibus cable in desired length on request.
Specifications:
| Inputs: |
|
| Outputs: |
|
| Fieldbus: | Profibus DP Slave |
| Power supply: | 24V DC (19-32V) |
| Dimensions: | 243.3 x 133 x 54.6mm (w x h x d) |
Related products
PROXIMITY & PHOTOELECTRIC SENSOR
All type & brand proximity & photoelectric sensor.
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
EASY SUPREME TOUCH 8.1(SMART SYSTEM) SUEDING MACHINE
NEW EASY SUPREME TOUCH 8.1 SMART SYSTEM [Enhancement, knowledge and innovation.]
Description:
MACHINE WITH INNOVATIVE TENSION CONTROL SYSTEM
NEW SUEDING MACHINE EASY SUPREME TOUCH 8.1 SMART
THE ULTIMATE NOVELTIES
The long experience gained in sueding, along with the close co-operation with customers, enabled Caru' to set up a specific machines making technique,
having the first-rate production as final target to achieve the highest quality in fabric finishing.
The new machine "EST 8.1" is a SUEDING MACHINE having 8 sueding rollers full covered of diamong emery,
8 (height) Sueding rollers with a Diam. of 200mm dynamically balanced with clamping/tensioning device for abrasive tape. Abrasive brushes can also be use.
Process fabrics with 8 sueding rollers on one side of the fabrics or 4 sueding rollers on right side and 4 sueding rollers on back side of the fabric.
Sueding rollers NO. 1 – 3 – 6 – 8, are provide with oscillating motion system.
Jointless Diamond tapes;One entire belt, high resistancy, it can be
reinstalled on the roller many times and every time without be damaged.
In all Caru's machines,the sueding rollers can be made in light weight composite carbon fibre, which are more light and strong, giving advantage of high rotary speed and assure a perfect stability.
Characteristics:
Diamond and Abrasive brushes can be used in this machine.
Washing Range after printing/Dyeing
Washing Range
Electric Steam Boiler
Electric Steam Boiler
Electric steam generator boiler | Horizontal electric boiler | Eco-friendly boiler
Horizontal electric automatic boiler is a kind of 99.8% efficiency which takes electricity as energy. It has the advantages of environmental protection, no pollution, no noise, convenient installation, small occupation
Output: steam
Thermal Capacity: 0.2ton/h-4ton/h 100kg/h-4000kg/h
Styles: horizontal or vertical
Powered by: electricity
Applied Industries: food, beverage, diaries, feed mill, garment, textile mill, paper mill, packaged, refinery, chemical, laundry, hotel, greenhouse etc
Reviews
There are no reviews yet.