You must be logged in to post a review.
Barco Sedo Profibus 16
Profi 16
External I/O modules
These units are part of the modular design initiative that enable our Sedomat controllers to operate using either their own I/O, remote I/O or an optimization of the two. These peripheral modules connect to the controllers using a PROFIBUS DP interface and offer both digital and analogue inputs and outputs. Both the Profi 16 and 32 were specialy designed fo the automation of textile finishing machines and are compatible with modules from other suppliers.
Optimized for the use in textile finishing
Profibus DP:
PROFIBUS DP is a world wide accepted standard field bus for the connection of inputs, outputs, frequency inverters, PLC components, sensors, valves, remote displays etc. This standard industry bus has been chosen as part of our open connectivity strategy.
The field bus concept significantly reduces the panel building overhead by eliminating a large part of the wiring.
World wide, thousands of PROFIBUS DP ready peripherals are available so providing an enormous choice of components. This flexibility and freedom of choice will have a positive effect on performance and price of the machine automation.
The PROFIBUS DP field bus is supported by Siemens, Klöckner Moeller, Mitsubishi, Matsushita, Allen-Bradley, Omron, Weidmüller, Wago, Lenze, KEB, Hitachi, Festo, Parker, etc.
Concept:
- All inputs are equipped with green, all outputs with red LED’s.
- All inputs and outputs are optical isolated.
- 4 Status-LED’s showing the actual status.
- All connections equipped with plug-in terminals.
- Ready to use Profibus cable in desired length on request.
Specifications:
| Inputs: |
|
| Outputs: |
|
| Fieldbus: | Profibus DP Slave |
| Power supply: | 24V DC (19-32V) |
| Dimensions: | 243.3 x 133 x 54.6mm (w x h x d) |
Related products
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
Clip / Roller Mercerizing Range
Clip / Roller Mercerizing Range
Sanforizing machine
Sanforizing machine
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
Erhardt+Leimer Digital Controller DC5501
Erhardt+Leimer Digital Controller DC5501
Erhardt Leimer (E+L) Digital Controller DC5501
Easy-Supreme Touch 6.2 Sueding Machine
Easy-Supreme Touch 6.2
Description:
SUEDING MACHINE EASY- SUPREME TOUCH 6.2 FOR SUEDING/BRUSHING & DIAMOND FINISHING
Caru’ introduced in the market the last version of the new EASY SUPREME TOUCH 6.2 with innovative features; The EASY SUPREME TOUCH 6.2 is a machine using abrasive brushes and diamond emery in combination; 6 units of brushes or sueding rollers are the standard setting, extendable to 8 units on requirement. Sueding is a very complex process influenced by several parameters and the results are not only gauged by the touch assessment but also from the visual assessment, an high level of reproducibility and flexibility are also required nowadays.
THE COMPLETE MACHINE FOR YOUR PRODUCTION.
Characteristics:
THE ULTIMATE NOVELTIES
The long experience gained in sueding, along with the close co-operation with customers, enabled Caru' to set up a specific machines making technique,
having the first-rate production as final target to achieve the highest quality in fabric finishing.
The NEW sueding & brushing machine EASY- SUPREME TOUCH 6.2" can use abrasive brushes or sueding rollers
covered with emery, paper or diamond. The machine can be use in combination giving special range of different effects
Brushes or sueding rollers which rotate at a variable speed lets to obtain excellent sueding results
both on knitted and on woven fabrics.
This machine is characterised by its high sueding efficiency due to a considerable number of contact-points and adjustments.
Right and reverse side of the fabric can be processed on one passage.
Diamond tape are made without joint, on one entire belt very strong and resistent that can be
reinstalled on the roller many times and every time without be damaged.
As on all Caru's machines, the sueding rollers can be made in light weight composite carbon fibre, which are more light and
strong, giving advantage of high rotary speed and assure a perfect stability.
Reviews
There are no reviews yet.