You must be logged in to post a review.
CORDUROY BLADE SHARPENING
CORDUROY BLADE SHARPENING
Description:
CORDUROY BLADES SHARPENING MACHINE;
The AFFI X model machine is used to grind and to sharp knives for cutting corduroy fabrics;
Two special hard diamond-coated grinding wheels turn at high speed to obtain an excellent knife sharpness.
The fine adjustment of the contact on the knife is done by the means of centesimal
positioning screws and a pneumatic system will perform a cycle in steps.
The machine is equipped with a device for the positioning, clamping and quick release of the knife.
Category: CORDUROY
Tags: caru, CORDUROY BLADE SHARPENING, knit fabrics, textile, textile machine, trust, Trust resources ltd, Woven fabrics
Related products
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
M5469 stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 70-400g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity, saturated vapor
Cloth holding method: needle clamp, cloth clamp, double use clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: high precision infrared
Guide rail form: no lubricating oil lubricating oil guide rail
Installed capacity: (55+n×15)kW
Features
1. High precision infrared edge detecting instrument, powerful antijamming capability;
2. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
3. Multistage fabric width adjustment;
4. Front and back double multistage operation system, PLC control system, convenient for operation;
5. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
6. Frequency converting control, high efficient heated air circulation system;
7. Special nozzle displacement;
WNS Gas (or oil) Fired Boiler
henan yuanda boiler factory
10 ton oil gas fire tube boiler
6000kg boiler with gas burner
automatic oil gas boiler 8 ton
henan yuanda boiler factory
WNS Gas(or oil) Fired Boiler
Boiler with oil / gas burner | Oil gas fire tube boiler | Oil gas fire tube boiler
WNS oil/gas boiler series is the packaged 3-pass wet back fire tube boiler, can produce steam or hot water. This boilers are fully automatic, safe and designed to operate on a wide range of liquid and gaseous fuels like heavy oil, light oil, gas, and dual fuel options.
Output: steam
Thermal Capacity: 0.2-40 ton/h, 15hp-2500hp
Styles: horizontal
Available Fuel: natural gas, LPG, heavy oil, diesel, dual fuel etc
Applied Industries: food, beverage, feed mill, textile mill, paper mill, packaged, refinery, chemical, pharmaceutical
Film calender (double side pressure three roller calender)
Film calender (double side pressure three roller calender)
This machine can be applied to pure cotton, chemical fiber, hemp, wool spinning and blended fabric calendering finishing;the middle roller of the equipment is fixed roller, the upper and lower rollers can respectively to the intermediate pressure. When the fabric pass the machine once, it can be calendering one time or be twice. After calendering the fabrics can achieve evenly shiny and good touching feeling. The equipment is also very save costs.
Product advantages:1.Nominal width: 1800-5000mm
2.Working speed: 20-70m / min
3.Design pressure: 60-120T





Reviews
There are no reviews yet.