Back to products
Trust resources ltd
- All products
- Uncategorized0 products
- AUTOMATION12 products
- Machinaries5 products
- Mazza Gianni9 products
- PACKAGING MACHINERY0 products
REPAIRING0 products
- Slitting Machine0 products
SPARE PARTS32 products
- Stenter Machine1 product
- TEXTILE MACHINERY58 products
HHS Series High Performance Soft Starter
HHS series of soft starter is the latest development of HNC has an international leading technology of intelligent AC motor soft starter. HHS Series Soft Starter uses the power electronic technology, the microprocessor technology and the modern control theory technology, has the present international advanced level the new starting equipment. This product can effectively limit the starting current of asynchronous motor, which can be widely used in fan, water pump, compressor and other transportation and heavy equipment, is the star delta conversion, autotransformer, magnetron step-down start ideal replacement equipment.
HHS series of soft starter has excellent performance with the international high-end soft starter of the same, further strengthen the product reliability and environmental adaptability, humanization and professional design, can meet various application requirements.
......................................................................FEATURES........................................................................
1. Multi start mode: The maximum output torque can be obtained by the voltage ramp mode. The maximum current can be obtained by the constant current soft starter mode, which can be applied to the load with large static friction force 2. High reliability: The high performance microprocessor is used to process the signal in the control system, so as to avoid the excessive adjustment of the analog circuit in the past, so as to obtain excellent accuracy and execution speed 3. High performance: Programmable delay start mode, programmable interlocks control No sequence requirements for input power Starting time, parking time can be modified Dynamic fault memory function, easy to find the cause of the fault, up to ten faults can be recorded 4. Field bus full dynamic control monitoring starter, easy networking: Bus type is MODBUS. 5. Variety of protection functions: Protection against over voltage, under voltage, over temperature, phase loss, motor overload, etc.。 6. English character display function: LCD display a variety of operating parameters, programming and fault state with text prompts 7. Perfect humanized design: Beautiful appearance and reasonable structure Perfect function and simple operation Solid, reliable and compact The artistic design of industrial products 8. Reliable quality assurance: Computer simulation design STM patch production process Excellent electromagnetic compatibility High temperature aging, vibration test before the factory 9. Quick and thoughtful after-sales service: Reliable performance and quality lay the foundation for quality service Provide excellent and complete equipment design Timely and thoughtful use of consulting Continuously improve product performance according to user opinion.
HSV-180AD AC380V Servo Drive
HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
...................................................................FEATURES..........................................................................
- High Performance AC digital servo drive
- Easy and flexible control (five control modes)
- Full state display
- Various interface and control modes
- Applicable to situations that requires high speed and high power
- Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
HV390 Series Mini Design Frequency Inverter
HV390 is the newest AC inverter with compact design from HNC Electric, Thanks to advanced current vector control algorithm and newest hardware, HV390 has high stability and perfect motor control performance. Based on listening and understanding of customers’ requirement, HV390 supports full range of input voltage ( AC 120V / 220V / 380V / 460V and etc.) , complete functions for different countries and applications.
*Mini design housing suitable for micro automation such as packaging machine, labeling machine, conveyor belt etc.
*Installation back mounting system can insert the inverter directly into the rack
*Programmable DI/DO/AI/AO as well as RS485 Modbus RTU make easy communication with other devices
*Integrated PID function support most of water supply applications
*Integrated multi-speed function support most of texitile application
1. Advanced motor control technology support both Open loop vector control(SVC) and V/F control.
2. Different input voltage( 220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).
3. High starting torque characteristics and precise speed control.
4. Suitable for all regions which have different grid and voltage.
5. All product type integrate force-cooling fan.
6. Built in simple PLC, PID , programmable I/O terminals, RS485 interface, analog input / output control function and other rich control functions
7. Mini design housing suitable for micro automation such as packaging machine, labeling machine, conveyor belt etc
HV480 Series High Performance Frequency Inverter
New HV480 series is a general current vector control inverter integrated with the performance and features in a high degree. HV480 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control.
Detachable keyboard，support copy parameters by keypad, debugging software on PC, built-in EMC filter, reduce EMC interference, .ect. These optimized designs make HV480 series an industry-leading product and bring tangible benefits to customers.
Customer success, Market Service！HV480 in terms of performance and control are worthy of trust!
1. Advanced motor control technology support Open loop vector control(SVC) and V/F control.
2. Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).
3. High starting torque characteristics and precise speed control.
4. Rich and flexible I/O accesses and field bus options.
5. Suitable for all regions which have different grid and voltage.
6. Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) .
7. Programmable DI/DO/AI/AO, and Modbus RTU make easy communication with other devices.
8. Detachable keyboard，support copy parameters by keypad, support keyboard extension.
9. Debugging software, suitable for parameter set, waveform monitor, optimizing device performance.
10. Multi-pumps control, constant pressure water supply function.
11. Built-in EMC filter, reduce EMC interference , reduce malfunctions and improve accuracy.
12. Kinds of communication cards are available, Easy to integrate into the network to help Industry 4.0.
HV580L Series Elevator Inverter
HV580L series frequency inverter is the professional for elevator of HNC. It concludes below improvement & innovation based on the ordinary V/F inverter. With the high-end design and high quality and reliability, HV580 series inverter will bring the users all new experience.
-
1. Smooth ride performance
-
2. Integrated brake control
-
3. Default factory setting user friendly factory, get you started quickly.
-
4. 4-Indepenent S-Ramps
-
5. Programmable DC –injection braking
-
6. Complete functions for elevator application
HV590 Series FVC High Performance Frequency Inverter
New HV590 series is a general current vector control inverter integrated with the performance and features in a high degree. HV590 with industry-leading drive performance and functionality control, using unique current vector control algorithm can efficiently drive induction motor to achieve high accuracy, high torque and high-performance control.
Customer success, Market Service！HV590 in terms of performance and control are worthy of trust!
....................................................................FEATURES.........................................................................
1.Advanced motor control technology support both Open loop vector control(SVC), Closed loop vector control(FVC) and V/F control.
2.Different input voltage(220V single phase/220V 3 phase/380V 3 phase/460V 3 phase).
3.High starting torque characteristics and precise speed control.
4.Rich and flexible I/O accesses and field bus options.
5.Suitable for all regions which have different grid and voltage.
6.Upgrade I/O(NPN/PNP compatible) can meet more application requirement without controller(PLC) like elevator, textile etc.
7.Programmable DI/DO/AI/AO as well as RS485 Modbus RTU make easy communication with other devices.
Infrared edge sensor FR 5503
Product description
- Used for optical and mechanical scanning of web edges in tenters
- Infrared edge sensor based on the reflection principle
- Reliable scanning of the web edge even on contrast-rich printed materials and low-reflective colors
- In case of uneven web edges, mechanical scanning by pivoting in the scanning lever will dampen the control
- Measuring range: ±10 mm
Technical Specifications
| Nominal supply voltage | 24 V DC |
| Permitted supply voltage range | 20 to 30 V DC (ripple included) |
| Current consumption | 100 mA |
| Power consumption | 2.4 W |
| Scanning frequency | 100 Hz |
| Measuring range | +/- 10 mm |
| Distance edge sensor - web | 36 mm |
| Protection class | Max. IP 65 with suitable connector inserted |
| Ambient temperature | +10 °C to +60 °C |
| Storage temperature | -10 °C to +80 °C |
| Weight without scanning lever | 0.37 kg |
| Weight with scanning lever | 0.46 kg |
LAPPING BRUSHES
Description
The aim of these bushes is to have a homogeneous lapping effect, avoiding any problems of rows and folds over the entire surface of the fabric.Manufacturing Features
- Manufactured with a tube of special steel
- The pins are ground and hot introduced
- A wide choice of grain and abrasive section
- The hole is specially arranged so to allow the tissue to remain stretched all the time
- Manufactured in accordance with the Costumer’s dimensions and features
- The materials and the machining processes we use are a guarantee for complying with the functional features and the safety standards
Functional Features
- Dynamic balance with certification, based on the speed requested by the Customer
- Longitudinal and torsion stiffness suitable for avoiding unwanted deformation and vibrations
- A high resistance of the abrasive bristles, even under hard working conditions and on several kinds of tissues
LAPPING BRUSHES EQUIPPED WITH CERAMIC COATED BRISTLES
Description
The iam of these brushes is to have a homogenous effect of grinding, avoiding problems of rows and folds over the entire surface, producing new effects on the fabricManufacturing Features
- Manufactured in a special aluminium
- Bristles in rilsan resistant at high temperatures
- The bristles are placed on a tile in aluminium with hand-made sewings, in order to grant a higher bristle tightness, for the great effort to which it is subjected
- Turned and levelled external surface for a perfect circillarity and concentricity respect to the axe of rotation
- Manufactured by respecting the dimensions and the features chosen by the Customer
- The materials and the working processes used, grant the respect of the function al features and of the safety regulations
Functional Features
- Possibility to assemble the tiles on the surface of any other cylinder
- Maximum easyness in the substitution of the damaged tiles
- Long working life even in hard exercise conditions
LASER ENGRAVING [LS100]
LASER ENGRAVING [LS100]
Description:
LASER ENGRAVING MACHINE LSC100 激光雕刻机
ENGRAVING MACHINE SUITABLE FOR RUBBER ROLLER AND RUBBER SLEEVES.
Laser engraving machine type LSC120
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
PLC Control, Touch-Screen;
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation