INFRARED EDGE ALIGNMENT SERIES
Product description
ZJ-DB03 model photoelectric edge alignment probe is used widely in fabric rolling machine, rolling inspecting machine and other kinds of rolling or packing machines in the papermaking and plastic industries. This equipment can control the edge smooth while the products are being rolled to guarantee the quality of the finished rolled products. It is also suitable for substance presence detecting.
Reviews (0)
You must be logged in to post a review.
Related products
STRIPPING MACHINE FOR ROTARY SCREENS
STRIPPING MACHINE FOR ROTARY SCREENS [ERALASER]
Description:
This machine has been designed to strip printing rotary screens;
Direct laser beam is used to strip (to remove) the coated resin from the nickel screen surface.
LASER STRIPPING MACHINE , the machine is generally equipped for taking up screens of standard repeats of 640mm, 820mm, 914mm, 1018mm. Screen lenght upto 3700mm.
Characteristics:
PLC Control ; Touch-Screen; Single Beam Laser; Long Life Laser Source.
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
5473 stenter setting machine
5473 stenter setting machine
RAISING MACHINE SINGLE DRUM [G24]
RAISING MACHINE SINGLE DRUM [G24]
Description:
The raising machine G24 is controlled by PLC, with operator interface by Color Touch Screen and inverters controlled. Machine can process any kind of fabrics from natural or synthetic fibres and is available with 24, 28, 30 and 36 raising rollers, widths from mm.1800 to mm.3600; The machine has metallic cleaning brushes in synchronization with the drum; The metallic brushes are use for cleaning and sharpening of the raising fillet and allow raising fillets last longer.
Vacuum Hot Water Boiler
Vacuum Hot Water Boiler
Boiler with oil/gas burner | Central heating boiler | Boiler for heating
Vacuum hot water boilers also named vacuum phase change hot water boiler. There is a vacuum condition inside, fill heat medium water in furnace and heat these water through oil/gas. Through heat exchange, the heat inside the boiler is transfered to outside water.
Transfer medium: hot water
Thermal Capacity: 0.3-7 mw 300-7,000 kw/h 200,000-6,000,000 Kcal/h
Efficiency: 99.9%
Available Fuel: heavy oil, diesel, furnace oil, biogas, NG, CNG, LNG, LPG, dual fuel
Applied Industries: heating & drying like: food, beverage, wood chamber, greenhouse, building heating, hotel, school, etc
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
RAISING MACHINE DOUBLE DRUM [2G24 ]
RAISING MACHINE DOUBLE DRUM [2G24 ]
Description:
RAISING MACHINES FOR WOVEN AND KNITTING FABRICS WITH DOUBLE DRUMS
DOUBLE DRUMS WITH 24 ROLLERS . The raising machine 2G24 is controlled by PLC, with operator interface by Color Touch Screen and inverters controlled.Machine can process any kind of fabrics from natural or synthetic fibres and is available with 24 + 24 raising rollers,widths from mm.1800 to mm.3600; The machine has metallic cleaning brushes in synchronization with the drum; The metallic brushes are use for cleaning and sharpening of the raising fillet and allow raising fillets last longer.
Characteristics:
The 2G24 raising machine has been recently renewed and equipped with the latest components and knowledges.
In the 2G24 machine, the main objective was to create a versatile and complete machine,
capable of facing and therefore facilitating all the problems related to the raising process of all types of fabrics.
The design of the new range of our raising machines, was carried out according to the most modern design methods,
thus allowing the creation of a product that, on the market, is placed in the range of high performance machines.
Innovative, high-performance, sturdy and very reliable raising machines made in the name of technological innovation at the service of an increasingly demanding clientele but always in accordance with our sixty-year construction experience.
Reviews
There are no reviews yet.