You must be logged in to post a review.
HSV-180AD AC380V Servo Drive
HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
………………………………………………………….FEATURES………………………………………………………………..
- High Performance AC digital servo drive
- Easy and flexible control (five control modes)
- Full state display
- Various interface and control modes
- Applicable to situations that requires high speed and high power
- Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
Related products
Sanforizing machine
Sanforizing machine
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
DUST CLEANING BRUSHING MACHINE SP200X2 for knits fabrics
Description:
DUST CLEANING MACHINE
BRUSHING MACHINE TYPE SP200X2 FOR KNITS FABRICS
This brushing/cleaning machines is a COMBINATION of three actions:
beating / brushing / sucking.
Beating is made by beaters rollers and brush by the means of brush rollers,
sucking is made from an efficient air sucking system that catch the removed dust / lint and collect them to an external filter unit.
Brushes and beaters rollers are working at the same time on front and on back sideof the fabric to assure the maximum cleaning efficiency.
The entire units is made of mild-steel.
Some parts for their particular constitution and function, are galvanized coating and the frames are treated with epoxy paints.
Additional air blades can be installed in the machine; The air blades are blowing ionised high air pressure that let's the stubborn static dust to be roved easily from fabric surface.
Characteristics:
Dust Cleaning Brushing machines, Type SP200X2 with;
Inlet with adjustable tensioning bar;
Double adjustable expander unit with Two motorized scroll rollers adjustable at 360°;
Centering device type “Slatted drum” with feeding motor and photocells for centering;
Individual motor for each brush;
2 sets of beaters rollers made by stainless steel star-shape;
2 sets of Horse hair brushes made by straight bars bristles shape;
Electric actuators for brush distance position. ( EXCLUSIVE FROM CARU’)
Transparent windows for easy access in to the machine;
Electric panel with inverter for fabrics drive;
Distance sensor for no-tension control of the running fabrics with accumulation cradle ( EXCLUSIVE INNOVATION FROM CARU’);
Outlet motor roller with plaiter unit at outlet ;
Complete suction, with motor-fan and filter bags unit;
EASY SUPREME TOUCH 8.1(SMART SYSTEM) SUEDING MACHINE
NEW EASY SUPREME TOUCH 8.1 SMART SYSTEM [Enhancement, knowledge and innovation.]
Description:
MACHINE WITH INNOVATIVE TENSION CONTROL SYSTEM
NEW SUEDING MACHINE EASY SUPREME TOUCH 8.1 SMART
THE ULTIMATE NOVELTIES
The long experience gained in sueding, along with the close co-operation with customers, enabled Caru' to set up a specific machines making technique,
having the first-rate production as final target to achieve the highest quality in fabric finishing.
The new machine "EST 8.1" is a SUEDING MACHINE having 8 sueding rollers full covered of diamong emery,
8 (height) Sueding rollers with a Diam. of 200mm dynamically balanced with clamping/tensioning device for abrasive tape. Abrasive brushes can also be use.
Process fabrics with 8 sueding rollers on one side of the fabrics or 4 sueding rollers on right side and 4 sueding rollers on back side of the fabric.
Sueding rollers NO. 1 – 3 – 6 – 8, are provide with oscillating motion system.
Jointless Diamond tapes;One entire belt, high resistancy, it can be
reinstalled on the roller many times and every time without be damaged.
In all Caru's machines,the sueding rollers can be made in light weight composite carbon fibre, which are more light and strong, giving advantage of high rotary speed and assure a perfect stability.
Characteristics:
Diamond and Abrasive brushes can be used in this machine.
LASER ENGRAVING MACHINE [ZEUS]
LASER ENGRAVING MACHINE [ZEUS]
Description:
LASER ENGRAVING MACHINE FOR PRINTING ROTARY SCREENS
& FLEXOGRAPHIC ROLLERS AND SLEEVES
DIRECT LASER ENGRAVING SYSTEM
Laser engraving machine
The laser engraving machine has two main parts: a laser source and a controller system. The beam emitted from the laser allows the controller to trace patterns onto the surface of the roller. The controller (computer) controls the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The point where the laser beam touches the surface of the roller should be on the focal plane of the laser’s optical system, and is usually synonymous with its focal point. This point is typically small, less than a fraction of a millimeter (depending on the optical wavelength). Only the area inside this focal point is significantly affected when the laser beam passes over the surface. The energy delivered by the laser changes the surface of the material under the focal point. This is how material is removed from the surface to create an engraving. The surface material is vaporized during laser engraving, ventilation through the use of blowers and a vacuum pump that are required to remove the fumes arising from this process, and for removal of debris on the surface to allow the laser to continue engraving. The speed at which the beam moves across the material is also considered in creating engraving patterns. Changing the intensity and spread of the beam allows more flexibility in the design. For example, by changing the proportion of time (known as “duty-cycle”) the laser is turned on during each pulse, the power delivered to the engraving surface can be controlled appropriately for the material.
Characteristics:
The word Laser is actually an acronym
LASER
L is for Light
A is for Amplification
S is for Stimulated
E is for Emission
R is for Radiation
M5471 knitting stentering boarding machine
Product uses
This product is appropriate for polyester filament yarn, polyester low elasticity silk fabric, pure cotton or other knitting fabric with weight of 60-700g/m2.
Main technical index
Form: heated air circulation, single layer horizontal type
Vehicle category: left hand or right hand
Nominal width(mm): 1800-3600
Amplitude modulation range(mm): 700-(Nominal width-200 mm)
Speed range: 5-100m/min
Over-feed ratio: -10% - +30
Oasthouse temperautre: 100-230ºC
Heat source: heat-carrying oil, fuel gas(city gas, natural gas, water gas, liquefied petroleum gas), electricity
Cloth holding method: needle clamp
Cropping form: simple pendulum type; or double use
Edge detecting form: High precision infrared edge detecting
Guide rail form: no lubricating oil steel plate guide rail
Size: (16115+n×3000)×(W+2500)mm×2300mm
Installed capacity: (55+n×15)kW
Features
1. Active infrared, synchronous with main engine;
2. E+L tension sensor controlled padder, realizing low tension and constant tension running;
3. E+L infrared edge detecting indstrument, excellent antijamming capability;
4. 6mm thick steel plate graphite guide rail, no need of refueling, long serve life;
5. 9 section width adjustment;
6. Heat-carrying oil heating method, high accuracy;
7. Front and back double multistage operation system, PLC control system, convenient for operation;
8. Landing minor-cycle building block system oasthouse, small volume, large blast capacity;
9. Frequency converting control, high efficient heated air circulation system;
10. Special nozzle displacement;
Reviews
There are no reviews yet.